The setting data are memorized in nonvolatile memory, so the data is not deleted at the time of a power interruption. (T

1) For the main body of ME96: Please set the following values on the “Set-up menu 2”. In case of MODBUS RTU S

The acquired digit length of “1280”, “1281” and “1304” varies with the full load power. The acquired digit length of “1

MODBUS RTU communication and CC-Link communication can be used at the same time.

An option for ME96NS series can NOT be installed to the main body of ME96SS series. An option for ME96SS series can NOT

This model operates normally even at the reversed phase sequence. It is unnecessary to change wiring.

ME96SSHB-MB • Total harmonics and odd orders of harmonics from 1st to 31st • Effective value and distortion rate

Accuracy class index of active energy is a number which gives the limits of the permissible percentage error as defined

Please check the register addresses. The register address for the present value of the power factor of each phase is

The response speed of the analog output is 2 seconds or less. The response speed of harmonic measurement is 10 seconds

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products > Power Management Meters

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Power Management Meters

Electrical Indicators(57)

FAQ within [ Power Management Meters ]

31-40 of Total 57

prev 4 / 6page next

Compensation for power failure (ME96SS series).

The setting data are memorized in nonvolatile memory, so the data is not deleted at the time of a power interruption. (The main body does not use a battery.)... More Details >>
- No：22163
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:16
- Category： Electrical Indicators
Setting for communication (ME96SS series).

1) For the main body of ME96: Please set the following values on the “Set-up menu 2”. In case of MODBUS RTU 　 Set-up menu No. Setti... More Details >>
- No：22181
- Release Date：2018/08/27 16:41
- Update：2020/04/10 17:05
- Category： Electrical Indicators
Register address for active energy monitors in the MODBUS RTU communication (ME96SS series).

The acquired digit length of “1280”, “1281” and “1304” varies with the full load power. The acquired digit length of “1304” is 6-digit. Each of “1280” and... More Details >>
- No：22184
- Release Date：2018/08/27 16:41
- Update：2020/04/10 17:18
- Category： Electrical Indicators
Concurrent-use of MODBUS RTU and CC-Link.

MODBUS RTU communication and CC-Link communication can be used at the same time. More Details >>
- No：22187
- Release Date：2018/08/27 16:41
- Category： Electrical Indicators
Availability of an option for ME96NS Series (ME96SS series).

An option for ME96NS series can NOT be installed to the main body of ME96SS series. An option for ME96SS series can NOT be installed to the main body of ME9... More Details >>
- No：22162
- Release Date：2018/08/27 16:41
- Category： Electrical Indicators
Operation at the reversed phase connection (ME96SS series).

This model operates normally even at the reversed phase sequence. It is unnecessary to change wiring. More Details >>
- No：22170
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:41
- Category： Electrical Indicators
Measuring harmonics range (ME96SS series).

ME96SSHB-MB • Total harmonics and odd orders of harmonics from 1st to 31st •Effective value and distortion rate. • Harmonic current and Harmonic... More Details >>
- No：22173
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:46
- Category： Electrical Indicators
Accuracy class index of active energy

Accuracy class index of active energy is a number which gives the limits of the permissible percentage error as defined in the IEC62053-22. More Details >>
- No：37704
- Release Date：2020/01/29 18:36
- Category： Electrical Indicators
The power factor does not match the indication values through MODBUS.

Please check the register addresses. The register address for the present value of the power factor of each phase is “0789”. There are the register... More Details >>
- No：37807
- Release Date：2020/04/10 15:10
- Category： Electrical Indicators
Response speed of the analog output (ME96SS series).

The response speed of the analog output is 2 seconds or less. The response speed of harmonic measurement is 10 seconds or less. More Details >>
- No：22157
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:12
- Category： Electrical Indicators

31-40 of Total 57

Inquiries

page top