MODBUS RTU communication and CC-Link communication can be used at the same time.

This model has the test function of the communication operation. For detail, refer to User's Manual: Detailed Edition f

This model operates normally even at the reversed phase sequence. It is unnecessary to change wiring.

When [SET] is flashing, the “Setting Value Confirmation Mode” is selected. In this case, the set values cannot be change

This model is available for direct measurement of 400V loads at the STAR connection in Three-phase 3-wire system.

The stored data can be read from MODBUS RTU communication. To use this function, MODBUS RTU communication is requ

In the case of "6-digit display", the upper 3 digits of "9-digit display" are hidden. For details, refer to the Instrum

It depends on the service conditions. Refer to the following guidelines. ① Contact output Contact output for ME9

Please check the register addresses. The register address for the present value of the power factor of each phase is “

Regardless of setting, the value of the default digit length is replied. When the register address “1304” for 6-dig

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products > Power Management Meters

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Power Management Meters

Electrical Indicators(57)

FAQ within [ Power Management Meters ]

31-40 of Total 57

prev 4 / 6page next

Concurrent-use of MODBUS RTU and CC-Link.

MODBUS RTU communication and CC-Link communication can be used at the same time. More Details >>
- No：22187
- Release Date：2018/08/27 16:41
- Category： Electrical Indicators
Validation method for communication function (ME96SS series).

This model has the test function of the communication operation. For detail, refer to User's Manual: Detailed Edition for setting. More Details >>
- No：22180
- Release Date：2018/08/27 16:41
- Category： Electrical Indicators
Operation at the reversed phase connection (ME96SS series).

This model operates normally even at the reversed phase sequence. It is unnecessary to change wiring. More Details >>
- No：22170
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:41
- Category： Electrical Indicators
Set values cannot be changed on the setting mode (ME96SS series).

When[SET] is flashing, the “Setting Value Confirmation Mode” is selected. In this case, the set values cannot be changed. Pressing the buttons of the “Set” ... More Details >>
- No：22168
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:22
- Category： Electrical Indicators
Availability for direct measurement of 400V loads (ME96SS series).

This model is available for direct measurement of 400V loads at the STAR connection in Three-phase 3-wire system. More Details >>
- No：22150
- Release Date：2018/08/27 16:41
- Category： Electrical Indicators
Read data stored by the built-in logging function

The stored data can be read from MODBUS RTU communication. To use this function, MODBUS RTU communication is required. It is not available with MOD... More Details >>
- No：37808
- Release Date：2020/04/10 15:09
- Category： Electrical Indicators
Display digit of ACTIVE ENERGY

In the case of "6-digit display", the upper 3 digits of "9-digit display" are hidden. For details, refer to the Instrument User's Manual which you use. ・El... More Details >>
- No：24809
- Release Date：2019/03/27 14:44
- Category： Electrical Indicators
Wire length for analog output and contact output（ME96SS series）

It depends on the service conditions. Refer to the following guidelines. ① Contact output Contact output for ME96 series is no-voltage "a" contact. The... More Details >>
- No：24807
- Release Date：2019/03/27 12:12
- Category： Electrical Indicators
Indication values of the main body is different from an obtained value through MODBUS RTU/ TCP (ME96SS series).

Please check the register addresses. The register address for the present value of the power factor of each phase is “0789”. There are the register addre... More Details >>
- No：22191
- Release Date：2018/08/27 16:41
- Category： Electrical Indicators
Active energy (lower digit indication) display upon communication test of MODBUS RTU/TCP communication (ME96SS series).

Regardless of setting, the value of the default digit length is replied. When the register address “1304” for 6-digit display is set, the value varies w... More Details >>
- No：22189
- Release Date：2018/08/27 16:41
- Update：2020/04/13 09:26
- Category： Electrical Indicators

31-40 of Total 57

Inquiries

page top