Storage temperature range: -25 °C to +75 °C Operating temperature range: -5 °C to +55 °C (Average: 35 °C or lower) Oper

In a board installation state, the protection class is equivalent to IP50. This model is not waterproof.

An option for ME96NS series can NOT be installed to the main body of ME96SS series. An option for ME96SS series can NOT

Pressing buttons of the “+” and the “-” at the same time on the measurement screen for 2 seconds shifts the unit of act

1) For the main body of ME96: Please set the following values on the “Set-up menu 2”. In case of MODBUS RTU S

They are the same dimensions. (Dimensions of an installation hole is 92 mm in length and width. Install this model two p

Pressing the buttons of the “Set” for 2 seconds or more shifts the mode to the “Setting Value Confirmation Mode”. It i

When the AC waveform distorted due to harmonics, the value changes. (For AC without harmonics, the calculated value will

A reason varies with the connection situation of options. (Please refer to the section 6 of the User’s Manual.) In c

The stored data can be read from MODBUS RTU communication. To use this function, MODBUS RTU communication is required

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products > Power Management Meters

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Power Management Meters

Electrical Indicators(57)

FAQ within [ Power Management Meters ]

41-50 of Total 57

prev 5 / 6page next

The operating/storage temperature and humidity

Storage temperature range: -25 °C to +75 °C Operating temperature range: -5 °C to +55 °C (Average: 35 °C or lower) Operating humidity range: 0% to 85% an... More Details >>
- No：22153
- Release Date：2018/08/27 16:41
- Update：2020/04/10 15:56
- Category： Electrical Indicators
IP protection class (ME96SS series).

In a board installation state, the protection class is equivalent to IP50. This model is not waterproof. More Details >>
- No：22158
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:13
- Category： Electrical Indicators
Availability of an option for ME96NS Series (ME96SS series).

An option for ME96NS series can NOT be installed to the main body of ME96SS series. An option for ME96SS series can NOT be installed to the main body of ME9... More Details >>
- No：22162
- Release Date：2018/08/27 16:41
- Category： Electrical Indicators
Checking non-displayed digit of active energy (ME96SS series).

Pressing buttons of the “+” and the “-” at the same time on the measurement screen for 2 seconds shifts the unit of active energy as follows. The measured ... More Details >>
- No：22172
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:44
- Category： Electrical Indicators
Setting for communication (ME96SS series).

1) For the main body of ME96: Please set the following values on the “Set-up menu 2”. In case of MODBUS RTU 　 Set-up menu No. Setti... More Details >>
- No：22181
- Release Date：2018/08/27 16:41
- Update：2020/04/10 17:05
- Category： Electrical Indicators
Installation compatibility with ME96NSR (ME96SS series).

They are the same dimensions. (Dimensions of an installation hole is 92 mm in length and width. Install this model two points with mounting brackets.) More Details >>
- No：22160
- Release Date：2018/08/27 16:41
- Category： Electrical Indicators
Checking the set values (ME96SS series).

Pressing the buttons of the “Set” for 2 seconds or more shifts the mode to the “Setting Value Confirmation Mode”. It is impossible to change the set values... More Details >>
- No：22165
- Release Date：2018/08/27 16:41
- Category： Electrical Indicators
Difference between measurement value of active power and calculated power value obtained from current, voltage and power factor (ME96SS series).

When the AC waveform distorted due to harmonics, the value changes. (For AC without harmonics, the calculated value will match with the displayed value.) A... More Details >>
- No：22178
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:56
- Category： Electrical Indicators
LCD COM is flashing (ME96SS series).

A reason varies with the connection situation of options. (Please refer to the section 6 of the User’s Manual.) In case of MODBUS RTU Error content: ... More Details >>
- No：22186
- Release Date：2018/08/27 16:41
- Update：2020/04/13 09:20
- Category： Electrical Indicators
Read data stored by the built-in logging function

The stored data can be read from MODBUS RTU communication. To use this function, MODBUS RTU communication is required. It is not available with MOD... More Details >>
- No：37808
- Release Date：2020/04/10 15:09
- Category： Electrical Indicators

41-50 of Total 57

Inquiries

page top