An option for ME96NS series can NOT be installed to the main body of ME96SS series. An option for ME96SS series can NOT

It is connectable with up to 31 units. It is necessary to prepare at least 3 PCs for connecting with 64 units. (31 uni

It is necessary to supply an auxiliary power. As for an auxiliary power supply, you can use 50 Hz or 60 Hz from 100 VAC

Please check the register addresses. The register address for the present value of the power factor of each phase is

It is possible to check them using the Data Acquisition Software EMU4-SW1. It is available for download without paymen

This model is compliant with CE marking, UL standard, KC Mark and FCC/IC.

The response speed of the analog output is 2 seconds or less. The response speed of harmonic measurement is 10 seconds

In a board installation state, the protection class is equivalent to IP50. This model is not waterproof.

In case of the input voltage of less than 11 V, the measurement values are as follows: Voltage: 0 V, Power supply: 0 W

ME96SSHB-MB • Total harmonics and odd orders of harmonics from 1st to 31st • Effective value and distortion rate

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products > Power Management Meters

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Power Management Meters

Electrical Indicators(57)

FAQ within [ Power Management Meters ]

1-10 of Total 57

prev 1 / 6page next

Availability of an option for ME96NS Series (ME96SS series).

An option for ME96NS series can NOT be installed to the main body of ME96SS series. An option for ME96SS series can NOT be installed to the main body of ME9... More Details >>
- No：22162
- Release Date：2018/08/27 16:41
- Category： Electrical Indicators
Connectable number of MODBUS RTU (ME96SS series).

It is connectable with up to 31 units. It is necessary to prepare at least 3 PCs for connecting with 64 units. (31 units + 31 units + 2 units) More Details >>
- No：22190
- Release Date：2018/08/27 16:41
- Category： Electrical Indicators
Power supply upon setting (ME96SS series).

It is necessary to supply an auxiliary power. As for an auxiliary power supply, you can use 50 Hz or 60 Hz from 100 VAC to 240 VAC and from 100 VDC to 240... More Details >>
- No：22161
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:14
- Category： Electrical Indicators
The power factor does not match the indication values through MODBUS.

Please check the register addresses. The register address for the present value of the power factor of each phase is “0789”. There are the register... More Details >>
- No：37807
- Release Date：2020/04/10 15:10
- Category： Electrical Indicators
Check the measurement values using MODBUS RTU communication

It is possible to check them using the Data Acquisition Software EMU4-SW1. It is available for download without payment from the following Web site. ... More Details >>
- No：37812
- Release Date：2020/04/10 15:10
- Category： Electrical Indicators
Standards for this model (ME96SS series).

This model is compliant with CE marking, UL standard, KC Mark and FCC/IC. More Details >>
- No：22146
- Release Date：2018/08/27 16:41
- Update：2020/04/10 14:27
- Category： Electrical Indicators
Response speed of the analog output (ME96SS series).

The response speed of the analog output is 2 seconds or less. The response speed of harmonic measurement is 10 seconds or less. More Details >>
- No：22157
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:12
- Category： Electrical Indicators
IP protection class (ME96SS series).

In a board installation state, the protection class is equivalent to IP50. This model is not waterproof. More Details >>
- No：22158
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:13
- Category： Electrical Indicators
Measurable minimum voltage (ME96SS series).

In case of the input voltage of less than 11 V, the measurement values are as follows: Voltage: 0 V,Power supply: 0 W, Reactive power: 0 var, Apparent pow... More Details >>
- No：22156
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:08
- Category： Electrical Indicators
Measuring harmonics range (ME96SS series).

ME96SSHB-MB • Total harmonics and odd orders of harmonics from 1st to 31st •Effective value and distortion rate. • Harmonic current and Harmonic... More Details >>
- No：22173
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:46
- Category： Electrical Indicators

1-10 of Total 57

Inquiries

page top