The setting data are memorized in nonvolatile memory, so the data is not deleted at the time of a power interruption. (T

It is possible to check them using the Data Acquisition Software EMU4-SW1. It is available for download without paymen

The battery of the Logging unit (ME-0000BU-SS96) is NOT exchangeable. Please order a new unit.

MODBUS RTU communication and CC-Link communication can be used at the same time.

The stored data can be read from MODBUS RTU communication. To use this function, MODBUS RTU communication is required

In the case of "6-digit display", the upper 3 digits of "9-digit display" are hidden. For details, refer to the Instrume

Please check the register addresses. The register address for the present value of the power factor of each phase is

Sample programs are described in Programming Manual. Please refer to suitable programming manual depending on CC-Link ve

They are the same dimensions. (Dimensions of an installation hole is 92 mm in length and width. Install this model two p

It is necessary to supply an auxiliary power. As for an auxiliary power supply, you can use 50 Hz or 60 Hz from 100 VAC

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products > Power Management Meters

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Power Management Meters

Electrical Indicators(57)

FAQ within [ Power Management Meters ]

1-10 of Total 57

prev 1 / 6page next

Compensation for power failure (ME96SS series).

The setting data are memorized in nonvolatile memory, so the data is not deleted at the time of a power interruption. (The main body does not use a battery.)... More Details >>
- No：22163
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:16
- Category： Electrical Indicators
Check the measurement values using MODBUS RTU communication

It is possible to check them using the Data Acquisition Software EMU4-SW1. It is available for download without payment from the following Web site. ... More Details >>
- No：37812
- Release Date：2020/04/10 15:10
- Category： Electrical Indicators
Availability for battery exchange for Logging Unit (ME96SS series).

The battery of the Logging unit (ME-0000BU-SS96) is NOT exchangeable. Please order a new unit. More Details >>
- No：22152
- Release Date：2018/08/27 16:41
- Update：2020/04/10 15:54
- Category： Electrical Indicators
Concurrent-use of MODBUS RTU and CC-Link.

MODBUS RTU communication and CC-Link communication can be used at the same time. More Details >>
- No：22187
- Release Date：2018/08/27 16:41
- Category： Electrical Indicators
Read data stored by the built-in logging function

The stored data can be read from MODBUS RTU communication. To use this function, MODBUS RTU communication is required. It is not available with MOD... More Details >>
- No：37808
- Release Date：2020/04/10 15:09
- Category： Electrical Indicators
Display digit of ACTIVE ENERGY

In the case of "6-digit display", the upper 3 digits of "9-digit display" are hidden. For details, refer to the Instrument User's Manual which you use. ・El... More Details >>
- No：24809
- Release Date：2019/03/27 14:44
- Category： Electrical Indicators
The power factor does not match the indication values through MODBUS.

Please check the register addresses. The register address for the present value of the power factor of each phase is “0789”. There are the register... More Details >>
- No：37807
- Release Date：2020/04/10 15:10
- Category： Electrical Indicators
Sample program for CC-LINK communication （ME96SS series）

Sample programs are described in Programming Manual. Please refer to suitable programming manual depending on CC-Link version which you use. ・Programming M... More Details >>
- No：24804
- Release Date：2019/03/27 12:12
- Category： Electrical Indicators
Installation compatibility with ME96NSR (ME96SS series).

They are the same dimensions. (Dimensions of an installation hole is 92 mm in length and width. Install this model two points with mounting brackets.) More Details >>
- No：22160
- Release Date：2018/08/27 16:41
- Category： Electrical Indicators
Power supply upon setting (ME96SS series).

It is necessary to supply an auxiliary power. As for an auxiliary power supply, you can use 50 Hz or 60 Hz from 100 VAC to 240 VAC and from 100 VDC to 240... More Details >>
- No：22161
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:14
- Category： Electrical Indicators

1-10 of Total 57

Inquiries

page top