It is possible to measure the received energy and the transferred energy separately.

Regardless of setting, the value of the default digit length is replied. When the register address “1304” for 6-digit

Please check the register addresses. The register address for the present value of the power factor of each phase is “

This model is available for direct measurement of 400V loads at the STAR connection in Three-phase 3-wire system.

Please check the following items. (A) Is the power supplied between MA and MB？ (When the power is not supplied, the disp

A reason varies with the connection situation of options. (Please refer to the section 6 of the User’s Manual.) In c

The expected lifetime is 10 years. Is recommended to replace the device every 10 year. However the environment of insta

In case of the input current of less than 0.005 A, the measurement values are as follows: Current: 0 A, Power supply:

The response speed of the analog output is 2 seconds or less. The response speed of harmonic measurement is 10 seconds

The setting data are memorized in nonvolatile memory, so the data is not deleted at the time of a power interruption. (T

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products > Power Management Meters > Electrical Indicators

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Electrical Indicators ]

1-10 of Total 57

prev 1 / 6page next

Measuring received energy and the transferred energy (ME96SS series).

It is possible to measure the received energy and the transferred energy separately. More Details >>
- No：22176
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:53
Active energy (lower digit indication) display upon communication test of MODBUS RTU/TCP communication (ME96SS series).

Regardless of setting, the value of the default digit length is replied. When the register address “1304” for 6-digit display is set, the value varies w... More Details >>
- No：22189
- Release Date：2018/08/27 16:41
- Update：2020/04/13 09:26
Indication values of the main body is different from an obtained value through MODBUS RTU/ TCP (ME96SS series).

Please check the register addresses. The register address for the present value of the power factor of each phase is “0789”. There are the register addre... More Details >>
- No：22191
- Release Date：2018/08/27 16:41
Availability for direct measurement of 400V loads (ME96SS series).

This model is available for direct measurement of 400V loads at the STAR connection in Three-phase 3-wire system. More Details >>
- No：22150
- Release Date：2018/08/27 16:41
Communication failure with the upper system through MODBUS RTU.

Please check the following items. (A) Is the power supplied between MA and MB？ (When the power is not supplied, the display does not work.) (B) Is the wir... More Details >>
- No：22182
- Release Date：2018/08/27 16:41
- Update：2020/04/10 17:08
LCD COM is flashing (ME96SS series).

A reason varies with the connection situation of options. (Please refer to the section 6 of the User’s Manual.) In case of MODBUS RTU Error content: ... More Details >>
- No：22186
- Release Date：2018/08/27 16:41
- Update：2020/04/13 09:20
Recommended update period (ME96SS series).

The expected lifetime is 10 years. Is recommended to replace the device every 10 year. However the environment of installed location, such as temperature ... More Details >>
- No：22154
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:02
Measurable minimum load (ME96SS series).

In case of the input current of less than 0.005 A, the measurement values are as follows: Current: 0 A, Power supply: 0 W, Reactive power: 0 var, Apparent... More Details >>
- No：22155
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:04
Response speed of the analog output (ME96SS series).

The response speed of the analog output is 2 seconds or less. The response speed of harmonic measurement is 10 seconds or less. More Details >>
- No：22157
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:12
Compensation for power failure (ME96SS series).

The setting data are memorized in nonvolatile memory, so the data is not deleted at the time of a power interruption. (The main body does not use a battery.)... More Details >>
- No：22163
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:16

1-10 of Total 57

Inquiries

page top