Pressing the buttons of the “Set” for 2 seconds or more shifts the mode to the “Setting Value Confirmation Mode”. It i

MODBUS RTU communication and CC-Link communication can be used at the same time.

(A) Measurement values As for the measurement elements on the test mode screen, the set values are displayed. As for

The acquired digit length of “1280”, “1281” and “1304” varies with the full load power. The acquired digit length of

This model has the test function of the communication operation. For detail, refer to User's Manual: Detailed Edition f

This model operates normally even at the reversed phase sequence. It is unnecessary to change wiring.

The measurement elements, including the digital indication, the unit indication and the phase indication, flash. And t

In case of the input voltage of less than 11 V, the measurement values are as follows: Voltage: 0 V, Power supply: 0

The stored data can be read from MODBUS RTU communication. To use this function, MODBUS RTU communication is requ

Please check the register addresses. The register address for the present value of the power factor of each pha

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products > Power Management Meters > Electrical Indicators

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Electrical Indicators ]

11-20 of Total 57

prev 2 / 6page next

Checking the set values (ME96SS series).

Pressing the buttons of the “Set” for 2 seconds or more shifts the mode to the “Setting Value Confirmation Mode”. It is impossible to change the set values... More Details >>
- No：22165
- Release Date：2018/08/27 16:41
Concurrent-use of MODBUS RTU and CC-Link.

MODBUS RTU communication and CC-Link communication can be used at the same time. More Details >>
- No：22187
- Release Date：2018/08/27 16:41
Replied value on the communication operation test of test mode (ME96SS series).

(A) Measurement values As for the measurement elements on the test mode screen, the set values are displayed. As for the other measurement elements, 0 is ... More Details >>
- No：22185
- Release Date：2018/08/27 16:41
- Update：2020/04/13 09:17
Register address for active energy monitors in the MODBUS RTU communication (ME96SS series).

The acquired digit length of “1280”, “1281” and “1304” varies with the full load power. The acquired digit length of “1304” is 6-digit. Each of “1280” and... More Details >>
- No：22184
- Release Date：2018/08/27 16:41
- Update：2020/04/10 17:18
Validation method for communication function (ME96SS series).

This model has the test function of the communication operation. For detail, refer to User's Manual: Detailed Edition for setting. More Details >>
- No：22180
- Release Date：2018/08/27 16:41
Operation at the reversed phase connection (ME96SS series).

This model operates normally even at the reversed phase sequence. It is unnecessary to change wiring. More Details >>
- No：22170
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:41
Display upon upper/lower limit alarm (ME96SS series).

The measurement elements, including the digital indication, the unit indication and the phase indication, flash. And the “ALARM” indication and the “HI” in... More Details >>
- No：22169
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:36
Measurable minimum voltage (ME96SS series).

In case of the input voltage of less than 11 V, the measurement values are as follows: Voltage: 0 V,Power supply: 0 W, Reactive power: 0 var, Apparent pow... More Details >>
- No：22156
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:08
Read data stored by the built-in logging function

The stored data can be read from MODBUS RTU communication. To use this function, MODBUS RTU communication is required. It is not available with MOD... More Details >>
- No：37808
- Release Date：2020/04/10 15:09
The power factor does not match the indication values through MODBUS.

Please check the register addresses. The register address for the present value of the power factor of each phase is “0789”. There are the register... More Details >>
- No：37807
- Release Date：2020/04/10 15:10

11-20 of Total 57

Inquiries

page top