It is unnecessary. (It is necessary to prepare an auxiliary power supply which supplies power between MA and MB.)

1) For the main body of ME96: Please set the following values on the “Set-up menu 2”. In case of MODBUS RTU S

Pressing buttons of the “+” and the “-” at the same time on the measurement screen for 2 seconds shifts the unit of act

When [SET] is flashing, the “Setting Value Confirmation Mode” is selected. In this case, the set values cannot be change

Pressing the buttons of the “Set” for 2 seconds or more shifts the mode to the “Setting Value Confirmation Mode”. It i

The battery of the Logging unit (ME-0000BU-SS96) is NOT exchangeable. Please order a new unit.

It is possible to check them using the Data Acquisition Software EMU4-SW1. It is available for download without paymen

When the AC waveform distorted due to harmonics, the value changes. (For AC without harmonics, the calculated value will

In general, in case of measurement by the average method, the waveform including harmonics cause large error. This model

Sample programs are described in Programming Manual. Please refer to MODBUS Interface specifications（LSPM-0075） The prog

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products > Power Management Meters > Electrical Indicators

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Electrical Indicators ]

11-20 of Total 57

prev 2 / 6page next

Wiring for only measuring current (ME96SS series).

It is unnecessary. (It is necessary to prepare an auxiliary power supply which supplies power between MA and MB.) More Details >>
- No：22174
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:50
Setting for communication (ME96SS series).

1) For the main body of ME96: Please set the following values on the “Set-up menu 2”. In case of MODBUS RTU 　 Set-up menu No. Setti... More Details >>
- No：22181
- Release Date：2018/08/27 16:41
- Update：2020/04/10 17:05
Checking non-displayed digit of active energy (ME96SS series).

Pressing buttons of the “+” and the “-” at the same time on the measurement screen for 2 seconds shifts the unit of active energy as follows. The measured ... More Details >>
- No：22172
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:44
Set values cannot be changed on the setting mode (ME96SS series).

When[SET] is flashing, the “Setting Value Confirmation Mode” is selected. In this case, the set values cannot be changed. Pressing the buttons of the “Set” ... More Details >>
- No：22168
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:22
Checking the set values (ME96SS series).

Pressing the buttons of the “Set” for 2 seconds or more shifts the mode to the “Setting Value Confirmation Mode”. It is impossible to change the set values... More Details >>
- No：22165
- Release Date：2018/08/27 16:41
Availability for battery exchange for Logging Unit (ME96SS series).

The battery of the Logging unit (ME-0000BU-SS96) is NOT exchangeable. Please order a new unit. More Details >>
- No：22152
- Release Date：2018/08/27 16:41
- Update：2020/04/10 15:54
Check the measurement values using MODBUS RTU communication

It is possible to check them using the Data Acquisition Software EMU4-SW1. It is available for download without payment from the following Web site. ... More Details >>
- No：37812
- Release Date：2020/04/10 15:10
Difference between measurement value of active power and calculated power value obtained from current, voltage and power factor (ME96SS series).

When the AC waveform distorted due to harmonics, the value changes. (For AC without harmonics, the calculated value will match with the displayed value.) A... More Details >>
- No：22178
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:56
Measurement value different from other measuring instrument (ME96SS series).

In general, in case of measurement by the average method, the waveform including harmonics cause large error. This model uses the RMS value method and measu... More Details >>
- No：22177
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:54
Sample program for MODBUS RTU communication （ME96SS series）

Sample programs are described in Programming Manual. Please refer to MODBUS Interface specifications（LSPM-0075） The programming manual can be downloaded fr... More Details >>
- No：24805
- Release Date：2019/03/27 12:12

11-20 of Total 57

Inquiries

page top