Please check the register addresses. The register address for the present value of the power factor of each phase is “

Regardless of setting, the value of the default digit length is replied. When the register address “1304” for 6-digit

They are the same dimensions. (Dimensions of an installation hole is 92 mm in length and width. Install this model two p

In case of the input current of less than 0.005 A, the measurement values are as follows: Current: 0 A, Power supply:

There is a possibility of the wiring error for VT/CT to this model. Please check the wiring for VT/CT and this model.

An option for ME96NS series can NOT be installed to the main body of ME96SS series. An option for ME96SS series can NO

Sample programs are described in Programming Manual. Please refer to suitable programming manual depending on CC-Link ve

1) For the main body of ME96: Please set the following values on the “Set-up menu 2”. In case of MODBUS RTU S

This model operates normally even at the reversed phase sequence. It is unnecessary to change wiring.

The setting data are memorized in nonvolatile memory, so the data is not deleted at the time of a power interruption. (T

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products > Power Management Meters > Electrical Indicators

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Electrical Indicators ]

21-30 of Total 57

prev 3 / 6page next

Indication values of the main body is different from an obtained value through MODBUS RTU/ TCP (ME96SS series).

Please check the register addresses. The register address for the present value of the power factor of each phase is “0789”. There are the register addre... More Details >>
- No：22191
- Release Date：2018/08/27 16:41
Active energy (lower digit indication) display upon communication test of MODBUS RTU/TCP communication (ME96SS series).

Regardless of setting, the value of the default digit length is replied. When the register address “1304” for 6-digit display is set, the value varies w... More Details >>
- No：22189
- Release Date：2018/08/27 16:41
- Update：2020/04/13 09:26
Installation compatibility with ME96NSR (ME96SS series).

They are the same dimensions. (Dimensions of an installation hole is 92 mm in length and width. Install this model two points with mounting brackets.) More Details >>
- No：22160
- Release Date：2018/08/27 16:41
Measurable minimum load (ME96SS series).

In case of the input current of less than 0.005 A, the measurement values are as follows: Current: 0 A, Power supply: 0 W, Reactive power: 0 var, Apparent... More Details >>
- No：22155
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:04
Error in the measurement value (ME96SS series).

There is a possibility of the wiring error for VT/CT to this model. Please check the wiring for VT/CT and this model. More Details >>
- No：22179
- Release Date：2018/08/27 16:41
Availability of an option for ME96NS Series (ME96SS series).

An option for ME96NS series can NOT be installed to the main body of ME96SS series. An option for ME96SS series can NOT be installed to the main body of ME... More Details >>
- No：22167
- Release Date：2018/08/27 16:41
Sample program for CC-LINK communication （ME96SS series）

Sample programs are described in Programming Manual. Please refer to suitable programming manual depending on CC-Link version which you use. ・Programming M... More Details >>
- No：24804
- Release Date：2019/03/27 12:12
Setting for communication (ME96SS series).

1) For the main body of ME96: Please set the following values on the “Set-up menu 2”. In case of MODBUS RTU 　 Set-up menu No. Setti... More Details >>
- No：22181
- Release Date：2018/08/27 16:41
- Update：2020/04/10 17:05
Operation at the reversed phase connection (ME96SS series).

This model operates normally even at the reversed phase sequence. It is unnecessary to change wiring. More Details >>
- No：22170
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:41
Compensation for power failure (ME96SS series).

The setting data are memorized in nonvolatile memory, so the data is not deleted at the time of a power interruption. (The main body does not use a battery.)... More Details >>
- No：22163
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:16

21-30 of Total 57

Inquiries

page top