This model does NOT comply with the IEC61850.

With ME96SS ver.B, four measurement values can be checked digitally on one screen. For models before ME96SS ver.B, up to

Sample programs are described in Programming Manual. Please refer to suitable programming manual depending on CC-Link v

(A) Measurement values As for the measurement elements on the test mode screen, the set values are displayed. As for

ME96SSHB-MB • Total harmonics and odd orders of harmonics from 1st to 31st • Effective value and distorti

Pressing buttons of the “+” and the “-” at the same time on the measurement screen for 2 seconds shifts the unit of ac

The setting data are memorized in nonvolatile memory, so the data is not deleted at the time of a power interruption. (T

Please check the register addresses. The register address for the present value of the power factor of each pha

A reason varies with the connection situation of options. (Please refer to the section 6 of the User’s Manual.)

When the AC waveform distorted due to harmonics, the value changes. (For AC without harmonics, the calculated value wil

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products > Power Management Meters > Electrical Indicators

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Electrical Indicators ]

31-40 of Total 57

prev 4 / 6page next

Support status for IEC61850 (ME96SS series).

This model does NOT comply with the IEC61850. More Details >>
- No：22147
- Release Date：2018/08/27 16:41
- Update：2020/04/10 15:11
One screen display feature

With ME96SS ver.B, four measurement values can be checked digitally on one screen. For models before ME96SS ver.B, up to three measured values can be checked... More Details >>
- No：37806
- Release Date：2020/04/10 15:09
Sample program for CC-LINK communication （ME96SS series）

Sample programs are described in Programming Manual. Please refer to suitable programming manual depending on CC-Link version which you use. ・Programming M... More Details >>
- No：24804
- Release Date：2019/03/27 12:12
Replied value on the communication operation test of test mode (ME96SS series).

(A) Measurement values As for the measurement elements on the test mode screen, the set values are displayed. As for the other measurement elements, 0 is ... More Details >>
- No：22185
- Release Date：2018/08/27 16:41
- Update：2020/04/13 09:17
Measuring harmonics range (ME96SS series).

ME96SSHB-MB • Total harmonics and odd orders of harmonics from 1st to 31st •Effective value and distortion rate. • Harmonic current and Harmonic... More Details >>
- No：22173
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:46
Checking non-displayed digit of active energy (ME96SS series).

Pressing buttons of the “+” and the “-” at the same time on the measurement screen for 2 seconds shifts the unit of active energy as follows. The measured ... More Details >>
- No：22172
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:44
Compensation for power failure (ME96SS series).

The setting data are memorized in nonvolatile memory, so the data is not deleted at the time of a power interruption. (The main body does not use a battery.)... More Details >>
- No：22163
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:16
The power factor does not match the indication values through MODBUS.

Please check the register addresses. The register address for the present value of the power factor of each phase is “0789”. There are the register... More Details >>
- No：37807
- Release Date：2020/04/10 15:10
LCD COM is flashing (ME96SS series).

A reason varies with the connection situation of options. (Please refer to the section 6 of the User’s Manual.) In case of MODBUS RTU Error content: ... More Details >>
- No：22186
- Release Date：2018/08/27 16:41
- Update：2020/04/13 09:20
Difference between measurement value of active power and calculated power value obtained from current, voltage and power factor (ME96SS series).

When the AC waveform distorted due to harmonics, the value changes. (For AC without harmonics, the calculated value will match with the displayed value.) A... More Details >>
- No：22178
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:56

31-40 of Total 57

Inquiries

page top