It depends on the service conditions. Refer to the following guidelines. ① Contact output Contact output for ME96 s

The CC-Link is compatible with the new model.

In a board installation state, the protection class is equivalent to IP50. This model is not waterproof.

When [SET] is flashing, the “Setting Value Confirmation Mode” is selected. In this case, the set values cannot be change

ME96SSHB-MB • Total harmonics and odd orders of harmonics from 1st to 31st • Effective value and distortion rate

There is a possibility of the wiring error for VT/CT to this model. Please check the wiring for VT/CT and this model.

MODBUS RTU communication and CC-Link communication can be used at the same time.

The acquired digit length of “1280”, “1281” and “1304” varies with the full load power. The acquired digit length of “1

The measurement elements, including the digital indication, the unit indication and the phase indication, flash. And th

In general, in case of measurement by the average method, the waveform including harmonics cause large error. This model

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products > Power Management Meters > Electrical Indicators

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Electrical Indicators ]

41-50 of Total 57

prev 5 / 6page next

Wire length for analog output and contact output（ME96SS series）

It depends on the service conditions. Refer to the following guidelines. ① Contact output Contact output for ME96 series is no-voltage "a" contact. The... More Details >>
- No：24807
- Release Date：2019/03/27 12:12
Compatibility between present model and new model for the CC-Link (ME96SS series).

The CC-Link is compatible with the new model. More Details >>
- No：22151
- Release Date：2018/08/27 16:41
- Update：2020/04/10 15:51
IP protection class (ME96SS series).

In a board installation state, the protection class is equivalent to IP50. This model is not waterproof. More Details >>
- No：22158
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:13
Set values cannot be changed on the setting mode (ME96SS series).

When[SET] is flashing, the “Setting Value Confirmation Mode” is selected. In this case, the set values cannot be changed. Pressing the buttons of the “Set” ... More Details >>
- No：22168
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:22
Measuring harmonics range (ME96SS series).

ME96SSHB-MB • Total harmonics and odd orders of harmonics from 1st to 31st •Effective value and distortion rate. • Harmonic current and Harmonic... More Details >>
- No：22173
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:46
Error in the measurement value (ME96SS series).

There is a possibility of the wiring error for VT/CT to this model. Please check the wiring for VT/CT and this model. More Details >>
- No：22179
- Release Date：2018/08/27 16:41
Concurrent-use of MODBUS RTU and CC-Link.

MODBUS RTU communication and CC-Link communication can be used at the same time. More Details >>
- No：22187
- Release Date：2018/08/27 16:41
Register address for active energy monitors in the MODBUS RTU communication (ME96SS series).

The acquired digit length of “1280”, “1281” and “1304” varies with the full load power. The acquired digit length of “1304” is 6-digit. Each of “1280” and... More Details >>
- No：22184
- Release Date：2018/08/27 16:41
- Update：2020/04/10 17:18
Display upon upper/lower limit alarm (ME96SS series).

The measurement elements, including the digital indication, the unit indication and the phase indication, flash. And the “ALARM” indication and the “HI” in... More Details >>
- No：22169
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:36
Measurement value different from other measuring instrument (ME96SS series).

In general, in case of measurement by the average method, the waveform including harmonics cause large error. This model uses the RMS value method and measu... More Details >>
- No：22177
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:54

41-50 of Total 57

Inquiries

page top