If input by touching the key window is not possible, check the display settings of the cursor. Even if the key window i

The following shows how to check that the USB driver for GT Designer3 is installed on the personal computer. 1. Connect

If the touch switch is not displayed on the GOT, check the switch setting in the screen creation software. ◆ For GT Desi

To connect the RCPU or QnUD(P)VCPU to the GOT by setting the network number and station number using project data transf

Open settings are required when the communication method of the GOTs is TCP for a single MELSEC iQ-R series controller (

The screen save can be controlled from the PLC. Use the system information (read device). When the Forced Screen Saver

The following methods are available for exporting the alarm data stored on the GOT to a personal computer. 1. Export the

If the window screen does not display, confirm the following. • The screen switching device for the window screen to be

Differences between the white model and standard model of GT27 and GT25 are as follows. ・ The front face is white-color

The object gesture function can be enabled when the following conditions of 1. and 2. are both satisfied. This function

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Human Machine Interfaces > Human Machine Interfaces MELHMI-GOT > GOT2000 Series > GT27

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ GT27 ]

101-110 of Total 136

prev 11 / 14page next

Unable to input by touching the key window

If input by touching the key window is not possible, check the display settings of the cursor. Even if the key window is displayed, input is not possible if... More Details >>
- No：45271
- Release Date：2025/10/22 17:10
USB driver for GT Designer3

The following shows how to check that the USB driver for GT Designer3 is installed on the personal computer. 1. Connect the personal computer and GOT using ... More Details >>
- No：45270
- Release Date：2025/10/22 17:10
Touch switch not displayed on the GOT

If the touch switch is not displayed on the GOT, check the switch setting in the screen creation software. ◆ For GT Designer3 (GOT3000) Version 1 If the fo... More Details >>
- No：45269
- Release Date：2025/10/22 17:10
How to set the network number and station number for connection to RCPU and QnUD(P)VCPU

To connect the RCPU or QnUD(P)VCPU to the GOT by setting the network number and station number using project data transfer via the PLC or other methods, conf... More Details >>
- No：45268
- Release Date：2025/10/22 17:10
Open settings for connection to the built-in Ethernet port of the MELSEC iQ-R series

Open settings are required when the communication method of the GOTs is TCP for a single MELSEC iQ-R series controller (built-in Ethernet port). Configure t... More Details >>
- No：45267
- Release Date：2025/10/22 17:10
How to control the screen saver from the PLC

The screen save can be controlled from the PLC. Use the system information (read device). When the Forced Screen Saver Enable signal (System signal 1-1.b1)... More Details >>
- No：45248
- Release Date：2025/10/22 17:06
How to export the alarm data stored on the GOT to a personal computer

The following methods are available for exporting the alarm data stored on the GOT to a personal computer. 1. Export the data using the resource data transf... More Details >>
- No：45246
- Release Date：2025/10/22 17:04
Window screen not displayed

If the window screen does not display, confirm the following. • The screen switching device for the window screen to be used is set in the screen design sof... More Details >>
- No：45238
- Release Date：2025/10/22 16:51
Specifications of the white model

Differences between the white model and standard model of GT27 and GT25 are as follows. 　・ The front face is white-colored. 　・ The USB interface is located... More Details >>
- No：23507
- Release Date：2018/09/14 15:06
- Update：2018/09/25 17:26
Enabling/disabling the object gesture function

The object gesture function can be enabled when the following conditions of 1. and 2. are both satisfied. This function is disable when either 1. or 2. is n... More Details >>
- No：23461
- Release Date：2018/09/14 15:06
- Update：2025/10/09 18:22

101-110 of Total 136

Inquiries

page top