The following shows how to set the PLC station number when connecting the GOT to the PLC via Ethernet. Configure the se

The following shows an example of settings to connect multiple GOTs to the built-in Ethernet port of the QnUDVCPU via Et

Open settings are required when the communication method of the GOTs is TCP for a single MELSEC iQ-R series controller (

The following methods are available for exporting the alarm data stored on the GOT to a personal computer. 1. Export the

If a negative value is displayed instead of 40000 when monitoring the device value on the numerical display, check the n

For information on the lifespans of SD and CF memory cards (number of write cycles), check the specifications of the mem

These numbers are specified when accessing the buffer memory of the intelligent function module (bus conversion module).

The following objects are available to switch the displayed character string by turning the bit device on or off. 1. Bit

Only the following items can be edited (settings can be changed) in the standard key window. • Design • Display/hide

The following shows how to place the countdown timer on the screen using the timer device of the PLC. Set the numerical

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Human Machine Interfaces > Human Machine Interfaces MELHMI-GOT > GOT2000 Series > GT27

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ GT27 ]

111-120 of Total 136

prev 12 / 14page next

Setting the PLC station number when connecting the GOT to the PLC via Ethernet

The following shows how to set the PLC station number when connecting the GOT to the PLC via Ethernet. Configure the settings in the screen design software.... More Details >>
- No：45293
- Release Date：2025/10/22 17:12
Ethernet connection between multiple GOTs and the QnUDVCPU

The following shows an example of settings to connect multiple GOTs to the built-in Ethernet port of the QnUDVCPU via Ethernet. 1. Configure the following s... More Details >>
- No：23443
- Release Date：2018/09/14 15:06
- Update：2025/10/16 14:21
Open settings for connection to the built-in Ethernet port of the MELSEC iQ-R series

Open settings are required when the communication method of the GOTs is TCP for a single MELSEC iQ-R series controller (built-in Ethernet port). Configure t... More Details >>
- No：45267
- Release Date：2025/10/22 17:10
How to export the alarm data stored on the GOT to a personal computer

The following methods are available for exporting the alarm data stored on the GOT to a personal computer. 1. Export the data using the resource data transf... More Details >>
- No：45246
- Release Date：2025/10/22 17:04
When a negative value is displayed on the numerical display instead of a positive value

If a negative value is displayed instead of 40000 when monitoring the device value on the numerical display, check the numerical display settings in the scre... More Details >>
- No：45250
- Release Date：2025/10/22 17:06
Lifespans of SD and CF memory cards (number of write cycles)

For information on the lifespans of SD and CF memory cards (number of write cycles), check the specifications of the memory card to be used. The lifespans o... More Details >>
- No：45297
- Release Date：2025/10/22 17:12
I/O numbers and module number of the MELSEC series

These numbers are specified when accessing the buffer memory of the intelligent function module (bus conversion module). The number assignment method differ... More Details >>
- No：45253
- Release Date：2025/10/22 17:07
An object used to change the displayed character string according to the device value

The following objects are available to switch the displayed character string by turning the bit device on or off. 1. Bit comment Use this object to display... More Details >>
- No：45265
- Release Date：2025/10/22 17:09
Editing the standard key window

Only the following items can be edited (settings can be changed) in the standard key window. • Design • Display/hide setting for the value being entered,... More Details >>
- No：45407
- Release Date：2025/10/23 10:53
How to place a countdown timer on the screen using the timer device of the PLC

The following shows how to place the countdown timer on the screen using the timer device of the PLC. Set the numerical display with the screen design softw... More Details >>
- No：45252
- Release Date：2025/10/22 17:06

111-120 of Total 136

Inquiries

page top