You cannot specify the display in screen saver mode. Nothing is displayed in screen saver mode.

The following shows how to check that the USB driver for GT Designer3 is installed on the personal computer. 1. Connect

The screen number displayed on the GOT can be monitored with the PLC. Perform one of the following operations. 1. Monit

When connecting the personal computer (GX Works3) and the built-in Ethernet interface of the RnCPU via the USB interface

If input by touching the key window is not possible, check the display settings of the cursor. Even if the key window i

Specify the display position of the key window in the screen design software as follows. ◆ GT Designer3 (GOT3000) Versio

For information on the lifespans of SD and CF memory cards (number of write cycles), check the specifications of the mem

The GOT buzzer can be controlled from the PLC. Use the system information (read device). • Buzzer Three-shot Output si

Use the automatic decimal place adjustment function to display the integer value written to the PLC as a real number on

The following shows how to place the countdown timer on the screen using the timer device of the PLC. Set the numerical

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Human Machine Interfaces > Human Machine Interfaces MELHMI-GOT > GOT2000 Series > GT27

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ GT27 ]

121-130 of Total 136

prev 13 / 14page next

Specifying the display in screen saver mode

You cannot specify the display in screen saver mode. Nothing is displayed in screen saver mode. More Details >>
- No：23501
- Release Date：2018/09/14 15:06
- Update：2025/10/09 18:40
USB driver for GT Designer3

The following shows how to check that the USB driver for GT Designer3 is installed on the personal computer. 1. Connect the personal computer and GOT using ... More Details >>
- No：45270
- Release Date：2025/10/22 17:10
Checking the screen number of the displayed screen on the GOT

The screen number displayed on the GOT can be monitored with the PLC. Perform one of the following operations. 1. Monitor the screen switching device. Set ... More Details >>
- No：45275
- Release Date：2025/10/22 17:11
PLC access from GX Works3 via the GOT

When connecting the personal computer (GX Works3) and the built-in Ethernet interface of the RnCPU via the USB interface of the GOT3000 series or GOT2000 ser... More Details >>
- No：23490
- Release Date：2018/09/14 15:06
- Update：2025/10/09 17:33
Unable to input by touching the key window

If input by touching the key window is not possible, check the display settings of the cursor. Even if the key window is displayed, input is not possible if... More Details >>
- No：45271
- Release Date：2025/10/22 17:10
Specifying the display position of the key window

Specify the display position of the key window in the screen design software as follows. ◆ GT Designer3 (GOT3000) Version 1, GT Designer3 (GOT2000) Version ... More Details >>
- No：45299
- Release Date：2025/10/22 17:13
Lifespans of SD and CF memory cards (number of write cycles)

For information on the lifespans of SD and CF memory cards (number of write cycles), check the specifications of the memory card to be used. The lifespans o... More Details >>
- No：45297
- Release Date：2025/10/22 17:12
How to control GOT buzzer from the PLC

The GOT buzzer can be controlled from the PLC. Use the system information (read device). • Buzzer Three-shot Output signal (System signal 1-1.b8) • Buzzer... More Details >>
- No：45247
- Release Date：2025/10/23 10:54
How to display integer values written to the PLC as real numbers (with decimal points) on the GOT

Use the automatic decimal place adjustment function to display the integer value written to the PLC as a real number on the numerical display on the GOT. Co... More Details >>
- No：45291
- Release Date：2025/10/22 17:12
How to place a countdown timer on the screen using the timer device of the PLC

The following shows how to place the countdown timer on the screen using the timer device of the PLC. Set the numerical display with the screen design softw... More Details >>
- No：45252
- Release Date：2025/10/22 17:06

121-130 of Total 136

Inquiries

page top