You can use Data Transfer Tool to transfer the project data of the GOT3000 series and GOT2000 series. If your Data tra

The screen data of the GOT2000 series created in GT Designer3 (GOT2000) cannot be converted to screen data of the GOT100

When connecting the personal computer (GX Works3) and the built-in Ethernet interface of the RnCPU via the USB interface

These numbers are specified when accessing the buffer memory of the intelligent function module (bus conversion module).

To connect the RCPU or QnUD(P)VCPU to the GOT by setting the network number and station number using project data transf

You cannot specify the display in screen saver mode. Nothing is displayed in screen saver mode.

Possible causes of slow screen switching are as follows: • The incorrect communication driver is selected. • When connec

The following shows an example of settings to connect a single GOT to the built-in Ethernet ports of multiple QnUDVCPUs

When connecting the GOT to a PLC via Ethernet, set the IP address of the PLC in the screen design software. ◆ For GT Des

For information on the lifespans of SD and CF memory cards (number of write cycles), check the specifications of the mem

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Human Machine Interfaces > Human Machine Interfaces MELHMI-GOT > GOT2000 Series > GT27

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ GT27 ]

31-40 of Total 136

prev 4 / 14page next

Support for the GOT3000 series and GOT2000 series by the Data Transfer Tool

You can use Data Transfer Tool to transfer the project data of the GOT3000 series and GOT2000 series. If your Data transfer tool does not support your GOT... More Details >>
- No：23498
- Release Date：2018/09/14 15:06
- Update：2025/10/09 18:38
Utilizing screen data of the GOT2000 series for the GOT1000 series

The screen data of the GOT2000 series created in GT Designer3 (GOT2000) cannot be converted to screen data of the GOT1000 series editable in GT Designer3 (GO... More Details >>
- No：23420
- Release Date：2018/09/14 15:06
- Update：2018/09/26 16:36
PLC access from GX Works3 via the GOT

When connecting the personal computer (GX Works3) and the built-in Ethernet interface of the RnCPU via the USB interface of the GOT3000 series or GOT2000 ser... More Details >>
- No：23490
- Release Date：2018/09/14 15:06
- Update：2025/10/09 17:33
I/O numbers and module number of the MELSEC series

These numbers are specified when accessing the buffer memory of the intelligent function module (bus conversion module). The number assignment method differ... More Details >>
- No：45253
- Release Date：2025/10/22 17:07
How to set the network number and station number for connection to RCPU and QnUD(P)VCPU

To connect the RCPU or QnUD(P)VCPU to the GOT by setting the network number and station number using project data transfer via the PLC or other methods, conf... More Details >>
- No：45268
- Release Date：2025/10/22 17:10
Specifying the display in screen saver mode

You cannot specify the display in screen saver mode. Nothing is displayed in screen saver mode. More Details >>
- No：23501
- Release Date：2018/09/14 15:06
- Update：2025/10/09 18:40
Reasons for slow screen switching

Possible causes of slow screen switching are as follows: • The incorrect communication driver is selected. • When connected via Ethernet, a device with a d... More Details >>
- No：45283
- Release Date：2025/10/22 17:11
Ethernet connection between the GOT and multiple QnUDVCPUs

The following shows an example of settings to connect a single GOT to the built-in Ethernet ports of multiple QnUDVCPUs via Ethernet. 1. Configure the follo... More Details >>
- No：23444
- Release Date：2018/09/14 15:06
- Update：2025/10/16 16:05
IP address settings when connecting the GOT to a PLC via Ethernet

When connecting the GOT to a PLC via Ethernet, set the IP address of the PLC in the screen design software. ◆ For GT Designer3 (GOT2000) Version 1 Select [... More Details >>
- No：45282
- Release Date：2025/10/22 17:11
Lifespans of SD and CF memory cards (number of write cycles)

For information on the lifespans of SD and CF memory cards (number of write cycles), check the specifications of the memory card to be used. The lifespans o... More Details >>
- No：45297
- Release Date：2025/10/22 17:12

31-40 of Total 136

Inquiries

page top