The GOT buzzer can be controlled from the PLC. Use the system information (read device). • Buzzer Three-shot Output si

Specify the display position of the key window in the screen design software as follows. ◆ GT Designer3 (GOT3000) Versio

The PLC device value can be stored in the GOT internal device when the GOT is started by using GB40 (always on) as a tri

For information on the lifespans of SD and CF memory cards (number of write cycles), check the specifications of the mem

Switching is enabled by using the system information (read device). The GOT screen can be displayed/hidden by turning O

The following shows how to set the PLC station number when connecting the GOT to the PLC via Ethernet. Configure the se

The alarm popup display function can display the current alarm information in the foreground. Configure the settings in

Use the automatic decimal place adjustment function to display the integer value written to the PLC as a real number on

The following methods may increase the display speed. 1. Reduce the number of objects. 2. Configure the trigger action

If changing the clock data of the PLC CPU does not change the clock data of the GOT, check that time adjustment is set o

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Human Machine Interfaces > Human Machine Interfaces MELHMI-GOT > GOT2000 Series > GT21

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ GT21 ]

51-60 of Total 79

prev 6 / 8page next

How to control GOT buzzer from the PLC

The GOT buzzer can be controlled from the PLC. Use the system information (read device). • Buzzer Three-shot Output signal (System signal 1-1.b8) • Buzzer... More Details >>
- No：45247
- Release Date：2025/10/23 10:54
Specifying the display position of the key window

Specify the display position of the key window in the screen design software as follows. ◆ GT Designer3 (GOT3000) Version 1, GT Designer3 (GOT2000) Version ... More Details >>
- No：45299
- Release Date：2025/10/22 17:13
Storing the PLC device value in the GOT internal device when starting the GOT

The PLC device value can be stored in the GOT internal device when the GOT is started by using GB40 (always on) as a trigger. Since GB40 is on when the GOT ... More Details >>
- No：45298
- Release Date：2025/10/22 17:13
Lifespans of SD and CF memory cards (number of write cycles)

For information on the lifespans of SD and CF memory cards (number of write cycles), check the specifications of the memory card to be used. The lifespans o... More Details >>
- No：45297
- Release Date：2025/10/22 17:12
Switching the GOT screen from being displayed to hidden

Switching is enabled by using the system information (read device). The GOT screen can be displayed/hidden by turning ON/OFF the Forced Screen Saver Enable ... More Details >>
- No：45295
- Release Date：2025/10/22 17:12
Setting the PLC station number when connecting the GOT to the PLC via Ethernet

The following shows how to set the PLC station number when connecting the GOT to the PLC via Ethernet. Configure the settings in the screen design software.... More Details >>
- No：45293
- Release Date：2025/10/22 17:12
Alarm scrolling display

The alarm popup display function can display the current alarm information in the foreground. Configure the settings in the screen design software. ◆ For G... More Details >>
- No：45292
- Release Date：2025/10/22 17:12
How to display integer values written to the PLC as real numbers (with decimal points) on the GOT

Use the automatic decimal place adjustment function to display the integer value written to the PLC as a real number on the numerical display on the GOT. Co... More Details >>
- No：45291
- Release Date：2025/10/22 17:12
How to increase the display speed of the GOT

The following methods may increase the display speed. 1. Reduce the number of objects. 2. Configure the trigger actions and script settings per screen, not... More Details >>
- No：45287
- Release Date：2025/10/22 17:11
Timing of when changes to the PLC CPU's clock data are reflected to the GOT

If changing the clock data of the PLC CPU does not change the clock data of the GOT, check that time adjustment is set on the GOT or in GT Designer3. • GT37... More Details >>
- No：45286
- Release Date：2025/10/22 17:12

51-60 of Total 79

Inquiries

page top