The following methods are available to capture the screen displayed on the GOT. 1. Use the preview function in the scre

The GOT buzzer can be controlled from the PLC. Use the system information (read device). • Buzzer Three-shot Output si

Specify the display position of the key window in the screen design software as follows. ◆ GT Designer3 (GOT3000) Versio

The PLC device value can be stored in the GOT internal device when the GOT is started by using GB40 (always on) as a tri

The alarm popup display function can display the current alarm information in the foreground. Configure the settings in

Use the automatic decimal place adjustment function to display the integer value written to the PLC as a real number on

If changing the clock data of the PLC CPU does not change the clock data of the GOT, check that time adjustment is set o

When upgrading GT Designer3 Version 1, follow the instructions below to download the software from the download section

The screen number displayed on the GOT can be monitored with the PLC. Perform one of the following operations. 1. Monit

If input by touching the key window is not possible, check the display settings of the cursor. Even if the key window i

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Human Machine Interfaces > Human Machine Interfaces MELHMI-GOT > Engineering Software > HMI/GOT Screen Design Software

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ HMI/GOT Screen Design Software ]

11-20 of Total 26

prev 2 / 3page next

How to capture the screen displayed on the GOT

The following methods are available to capture the screen displayed on the GOT. 1. Use the preview function in the screen design software. 2. Select [Proje... More Details >>
- No：45264
- Release Date：2025/10/22 17:09
How to control GOT buzzer from the PLC

The GOT buzzer can be controlled from the PLC. Use the system information (read device). • Buzzer Three-shot Output signal (System signal 1-1.b8) • Buzzer... More Details >>
- No：45247
- Release Date：2025/10/23 10:54
Specifying the display position of the key window

Specify the display position of the key window in the screen design software as follows. ◆ GT Designer3 (GOT3000) Version 1, GT Designer3 (GOT2000) Version ... More Details >>
- No：45299
- Release Date：2025/10/22 17:13
Storing the PLC device value in the GOT internal device when starting the GOT

The PLC device value can be stored in the GOT internal device when the GOT is started by using GB40 (always on) as a trigger. Since GB40 is on when the GOT ... More Details >>
- No：45298
- Release Date：2025/10/22 17:13
Alarm scrolling display

The alarm popup display function can display the current alarm information in the foreground. Configure the settings in the screen design software. ◆ For G... More Details >>
- No：45292
- Release Date：2025/10/22 17:12
How to display integer values written to the PLC as real numbers (with decimal points) on the GOT

Use the automatic decimal place adjustment function to display the integer value written to the PLC as a real number on the numerical display on the GOT. Co... More Details >>
- No：45291
- Release Date：2025/10/22 17:12
Timing of when changes to the PLC CPU's clock data are reflected to the GOT

If changing the clock data of the PLC CPU does not change the clock data of the GOT, check that time adjustment is set on the GOT or in GT Designer3. • GT37... More Details >>
- No：45286
- Release Date：2025/10/22 17:12
Upgrading GT Designer3 Version 1

When upgrading GT Designer3 Version 1, follow the instructions below to download the software from the download section on the MITSUBISHI ELECTRIC FA Global ... More Details >>
- No：45276
- Release Date：2025/10/22 17:11
Checking the screen number of the displayed screen on the GOT

The screen number displayed on the GOT can be monitored with the PLC. Perform one of the following operations. 1. Monitor the screen switching device. Set ... More Details >>
- No：45275
- Release Date：2025/10/22 17:11
Unable to input by touching the key window

If input by touching the key window is not possible, check the display settings of the cursor. Even if the key window is displayed, input is not possible if... More Details >>
- No：45271
- Release Date：2025/10/22 17:10

11-20 of Total 26

Inquiries

page top