FAQ


FAQAbout Products
FAQ
Keyword Search
FAQ within [ GT37 ]
-
Network number (Net No.) and station number in the controller settings
The following shows the network number (Net No.) and the station number to be set in the controller settings. • The network number (Net No.) is assigned to ... More Details >>
- No:45257
- Release Date:2025/10/22 17:08
-
How to control GOT buzzer from the PLC
The GOT buzzer can be controlled from the PLC. Use the system information (read device). • Buzzer Three-shot Output signal (System signal 1-1.b8) • Buzzer... More Details >>
- No:45247
- Release Date:2025/10/23 10:54
-
Historical trend graph function
The historical graph function displays the device data (logging data) collected using the logging function chronologically in a graph. This function, unlike... More Details >>
- No:45242
- Release Date:2025/10/22 17:03
-
Storing the PLC device value in the GOT internal device when starting the GOT
The PLC device value can be stored in the GOT internal device when the GOT is started by using GB40 (always on) as a trigger. Since GB40 is on when the GOT ... More Details >>
- No:45298
- Release Date:2025/10/22 17:13
-
Screen switching in screen gesture mode
When screen switching occurs in screen gesture mode, the following operations are performed. • While the screen is touched Removing your finger from the sc... More Details >>
- No:23479
- Release Date:2018/09/14 15:06
- Update:2025/10/16 16:19
-
Specifying the display position of the key window
Specify the display position of the key window in the screen design software as follows. ◆ GT Designer3 (GOT3000) Version 1, GT Designer3 (GOT2000) Version ... More Details >>
- No:45299
- Release Date:2025/10/22 17:13
-
When connecting the MELSEC iQ-F series (FX5U, FX5UC, FX5UJ, or FX5S) via Ethernet, set Port No. in Connected Ethernet Controller Setting as shown in Table 2.... More Details >>
- No:45266
- Release Date:2025/10/22 17:10
-
An object used to change the displayed character string according to the device value
The following objects are available to switch the displayed character string by turning the bit device on or off. 1. Bit comment Use this object to display... More Details >>
- No:45265
- Release Date:2025/10/22 17:09
-
How to place a countdown timer on the screen using the timer device of the PLC
The following shows how to place the countdown timer on the screen using the timer device of the PLC. Set the numerical display with the screen design softw... More Details >>
- No:45252
- Release Date:2025/10/22 17:06
-
Upgrading to the GOT3000 series screen design software
Download the latest GT Designer3 (GOT3000) version from the HMI (GOT) download section on the Mitsubishi Electric FA Global Website. Download the help file ... More Details >>
- No:45303
- Release Date:2025/10/23 10:53
21-30 of Total 85