The GOT2000 series can assign USB drives as follows. For the details of the drive configuration, refer to the followin

Open settings are required when the communication method of the GOTs is TCP for a single MELSEC iQ-R series controller (

Download the latest version of GT Designer3 (GOT2000) from the download section for the GOT on the Mitsubishi Electric F

The GOT1000 series and GOT2000 series have the same panel cutting dimensions when their models are the same in screen si

The following shows an example of settings to connect a single GOT to the built-in Ethernet ports of multiple QnUDVCPUs

Perform the following procedure to use the screen gesture function. The screen gesture function is only available for t

You can create a project data for the GOT2000 series using GT Designer3 (GOT2000) Version 1.100E or later. If you use Ve

When connecting the GOT to a PLC via Ethernet, set the IP address of the PLC in the screen design software. ◆ For GT Des

Switching is enabled by using the system information (read device). The GOT screen can be displayed/hidden by turning O

Different screens cannot be displayed on the GOT screen (VNC server) and VNC client screen with the VNC server function.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Human Machine Interfaces

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Human Machine Interfaces

Human Machine Interfaces MELHMI-GOT(982)

GOT3000 Series(170)
GOT2000 Series(552)
GOT1000 Series(99)
GT SoftGOT(109)
Engineering Software(52)

FAQ within [ Human Machine Interfaces ]

111-120 of Total 184

prev 12 / 19page next

Assigning a USB memory drive for the GOT2000 series

The GOT2000 series can assign USB drives as follows. For the details of the drive configuration, refer to the following manual. ・ GT Designer3 (GOT2000... More Details >>
- No：23492
- Release Date：2018/09/14 15:06
- Update：2018/09/26 15:13
- Category： GOT2000 Series , GT27 , GT25
Open settings for connection to the built-in Ethernet port of the MELSEC iQ-R series

Open settings are required when the communication method of the GOTs is TCP for a single MELSEC iQ-R series controller (built-in Ethernet port). Configure t... More Details >>
- No：45267
- Release Date：2025/10/22 17:10
- Category： GOT2000 Series , GT SoftGOT , GT27 , GT25 , GT21 , SoftGOT2000 , GOT3000 Series , GT37 , SoftGOT3000
Upgrading the screen design software for the GOT2000 series

Download the latest version of GT Designer3 (GOT2000) from the download section for the GOT on the Mitsubishi Electric FA Global Website. Download the help ... More Details >>
- No：23510
- Release Date：2018/09/14 15:06
- Update：2018/09/25 17:25
- Category： GOT2000 Series , GT27 , GT25 , GT21 , HMI/GOT Screen Design Software
Differences in the panel cutting dimensions from the GOT1000 series

The GOT1000 series and GOT2000 series have the same panel cutting dimensions when their models are the same in screen sizes (excluding the GT25 open frame mo... More Details >>
- No：23421
- Release Date：2018/09/14 15:06
- Update：2018/09/26 16:37
- Category： GOT2000 Series , GT27 , GT25 , GT21
Ethernet connection between the GOT and multiple QnUDVCPUs

The following shows an example of settings to connect a single GOT to the built-in Ethernet ports of multiple QnUDVCPUs via Ethernet. 1. Configure the follo... More Details >>
- No：23444
- Release Date：2018/09/14 15:06
- Update：2025/10/16 16:05
- Category： GOT2000 Series , GT27 , GT25 , GT21 , GOT3000 Series , GT37
Using the screen gesture function

Perform the following procedure to use the screen gesture function. The screen gesture function is only available for the GOT3000 series (models with a capa... More Details >>
- No：23458
- Release Date：2018/09/14 15:06
- Update：2025/10/09 18:01
- Category： GOT2000 Series , GT27 , GOT3000 Series , GT37
Support of GT Designer3 by the GOT2000 series

You can create a project data for the GOT2000 series using GT Designer3 (GOT2000) Version 1.100E or later. If you use Version 1.100E or earlier of GT Designe... More Details >>
- No：23512
- Release Date：2018/09/14 15:06
- Category： GOT2000 Series , GT27 , GT25 , GT21 , HMI/GOT Screen Design Software
IP address settings when connecting the GOT to a PLC via Ethernet

When connecting the GOT to a PLC via Ethernet, set the IP address of the PLC in the screen design software. ◆ For GT Designer3 (GOT2000) Version 1 Select [... More Details >>
- No：45282
- Release Date：2025/10/22 17:11
- Category： GOT2000 Series , GT27 , GT25 , GT21 , GOT3000 Series , GT37
Switching the GOT screen from being displayed to hidden

Switching is enabled by using the system information (read device). The GOT screen can be displayed/hidden by turning ON/OFF the Forced Screen Saver Enable ... More Details >>
- No：45295
- Release Date：2025/10/22 17:12
- Category： GOT1000 Series , GOT2000 Series , GT SoftGOT , GT27 , GT25 , GT21 , GT15 , GT16 , GT11 , GT10 , GT14 , SoftGOT2000 , SoftGOT1000 , GOT3000 Series , GT37 , SoftGOT3000
Asynchronous screen display with the VNC server function

Different screens cannot be displayed on the GOT screen (VNC server) and VNC client screen with the VNC server function. To display different screens, use t... More Details >>
- No：23425
- Release Date：2018/09/14 15:06
- Update：2020/01/07 15:46
- Category： GOT2000 Series , GT27 , GT25 , GT21

111-120 of Total 184

Inquiries

page top