The following methods can be used to convert binary format logging files (*.G3L, *.G2L, or *.G1L) to CSV format. 1. Conv

The following shows how to place the countdown timer on the screen using the timer device of the PLC. Set the numerical

If changing the clock data of the PLC CPU does not change the clock data of the GOT, check that time adjustment is set o

Use the automatic decimal place adjustment function to display the integer value written to the PLC as a real number on

If input by touching the key window is not possible, check the display settings of the cursor. Even if the key window i

The screen save can be controlled from the PLC. Use the system information (read device). When the Forced Screen Saver

The following shows how to set the PLC station number when connecting the GOT to the PLC via Ethernet. Configure the se

Possible causes of slow screen switching are as follows: • The incorrect communication driver is selected. • When connec

The GOT buzzer can be controlled from the PLC. Use the system information (read device). • Buzzer Three-shot Output si

The following shows the network number (Net No.) and the station number to be set in the controller settings. • The net

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Human Machine Interfaces > Human Machine Interfaces MELHMI-GOT > GT SoftGOT > SoftGOT3000

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ SoftGOT3000 ]

1-10 of Total 32

prev 1 / 4page next

Converting a logging file (binary format) to a CSV file

The following methods can be used to convert binary format logging files (*.G3L, *.G2L, or *.G1L) to CSV format. 1. Conversion using the GOT utility functio... More Details >>
- No：45277
- Release Date：2025/10/22 17:11
How to place a countdown timer on the screen using the timer device of the PLC

The following shows how to place the countdown timer on the screen using the timer device of the PLC. Set the numerical display with the screen design softw... More Details >>
- No：45252
- Release Date：2025/10/22 17:06
Timing of when changes to the PLC CPU's clock data are reflected to the GOT

If changing the clock data of the PLC CPU does not change the clock data of the GOT, check that time adjustment is set on the GOT or in GT Designer3. • GT37... More Details >>
- No：45286
- Release Date：2025/10/22 17:12
How to display integer values written to the PLC as real numbers (with decimal points) on the GOT

Use the automatic decimal place adjustment function to display the integer value written to the PLC as a real number on the numerical display on the GOT. Co... More Details >>
- No：45291
- Release Date：2025/10/22 17:12
Unable to input by touching the key window

If input by touching the key window is not possible, check the display settings of the cursor. Even if the key window is displayed, input is not possible if... More Details >>
- No：45271
- Release Date：2025/10/22 17:10
How to control the screen saver from the PLC

The screen save can be controlled from the PLC. Use the system information (read device). When the Forced Screen Saver Enable signal (System signal 1-1.b1)... More Details >>
- No：45248
- Release Date：2025/10/22 17:06
Setting the PLC station number when connecting the GOT to the PLC via Ethernet

The following shows how to set the PLC station number when connecting the GOT to the PLC via Ethernet. Configure the settings in the screen design software.... More Details >>
- No：45293
- Release Date：2025/10/22 17:12
Reasons for slow screen switching

Possible causes of slow screen switching are as follows: • The incorrect communication driver is selected. • When connected via Ethernet, a device with a d... More Details >>
- No：45283
- Release Date：2025/10/22 17:11
How to control GOT buzzer from the PLC

The GOT buzzer can be controlled from the PLC. Use the system information (read device). • Buzzer Three-shot Output signal (System signal 1-1.b8) • Buzzer... More Details >>
- No：45247
- Release Date：2025/10/23 10:54
Network number (Net No.) and station number in the controller settings

The following shows the network number (Net No.) and the station number to be set in the controller settings. • The network number (Net No.) is assigned to ... More Details >>
- No：45257
- Release Date：2025/10/22 17:08

1-10 of Total 32

Inquiries

page top