If the GOT screen is black and does not respond to touch, check the POWER LED on the main unit. • Solid orange Cause: S

The following shows the network number (Net No.) and the station number to be set in the controller settings. • The net

The device values can be saved to a CSV file using the following functions. 1. GT37, GT27, GT25, GT21, GT SoftGOT3000,

When connecting the MELSEC iQ-F series (FX5U, FX5UC, FX5UJ, or FX5S) via Ethernet, set Port No. in Connected Ethernet Co

You cannot specify the display in screen saver mode. Nothing is displayed in screen saver mode.

To connect the RCPU or QnUD(P)VCPU to the GOT by setting the network number and station number using project data transf

The following shows how to set the PLC station number when connecting the GOT to the PLC via Ethernet. Configure the se

The following shows an example of settings to connect multiple GOTs to the built-in Ethernet port of the QnUDVCPU via Et

When connecting the GOT to a PLC via Ethernet, set the IP address of the PLC in the screen design software. ◆ For GT Des

When connecting the personal computer (GX Works3) and the built-in Ethernet interface of the RnCPU via the USB interface

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Human Machine Interfaces > Human Machine Interfaces MELHMI-GOT

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Human Machine Interfaces MELHMI-GOT

Engineering Software(52)

HMI/GOT Screen Design Software(26)
Simulation Software(1)
Data Transfer Tool(1)
Converter(1)

FAQ within [ Human Machine Interfaces MELHMI-GOT ]

31-40 of Total 184

prev 4 / 19page next

Black GOT screen

If the GOT screen is black and does not respond to touch, check the POWER LED on the main unit. • Solid orange Cause: Screen saver is active Solution: Che... More Details >>
- No：45301
- Release Date：2025/10/23 10:53
- Category： GOT2000 Series , GT27 , GT25 , GT21 , GT25 Rugged
Network number (Net No.) and station number in the controller settings

The following shows the network number (Net No.) and the station number to be set in the controller settings. • The network number (Net No.) is assigned to ... More Details >>
- No：45257
- Release Date：2025/10/22 17:08
- Category： GOT2000 Series , GT SoftGOT , GT27 , GT25 , GT21 , SoftGOT2000 , GOT3000 Series , GT37 , SoftGOT3000
Saving device values to a CSV file

The device values can be saved to a CSV file using the following functions. 1. GT37, GT27, GT25, GT21, GT SoftGOT3000, and GT SoftGOT2000 • Logging functio... More Details >>
- No：45240
- Release Date：2025/10/22 17:02
- Category： GOT1000 Series , GOT2000 Series , GT SoftGOT , GT27 , GT25 , GT21 , GT15 , GT16 , GT11 , GT10 , GT14 , SoftGOT2000 , SoftGOT1000 , GOT3000 Series , GT37 , SoftGOT3000
Port No. in Connected Ethernet Controller Setting when connecting the MELSEC iQ-F series via Ethernet

When connecting the MELSEC iQ-F series (FX5U, FX5UC, FX5UJ, or FX5S) via Ethernet, set Port No. in Connected Ethernet Controller Setting as shown in Table 2.... More Details >>
- No：45266
- Release Date：2025/10/22 17:10
- Category： GOT2000 Series , GT SoftGOT , GT27 , GT25 , GT21 , SoftGOT2000 , GOT3000 Series , GT37 , SoftGOT3000
Specifying the display in screen saver mode

You cannot specify the display in screen saver mode. Nothing is displayed in screen saver mode. More Details >>
- No：23501
- Release Date：2018/09/14 15:06
- Update：2025/10/09 18:40
- Category： GOT2000 Series , GOT1000 Series , GT27 , GT25 , GT21 , GT15 , GT16 , GT11 , GT10 , GT14 , GOT3000 Series , GT37
How to set the network number and station number for connection to RCPU and QnUD(P)VCPU

To connect the RCPU or QnUD(P)VCPU to the GOT by setting the network number and station number using project data transfer via the PLC or other methods, conf... More Details >>
- No：45268
- Release Date：2025/10/22 17:10
- Category： GOT2000 Series , GT27 , GT25 , GT21 , GOT3000 Series , GT37
Setting the PLC station number when connecting the GOT to the PLC via Ethernet

The following shows how to set the PLC station number when connecting the GOT to the PLC via Ethernet. Configure the settings in the screen design software.... More Details >>
- No：45293
- Release Date：2025/10/22 17:12
- Category： GOT2000 Series , GT SoftGOT , GT27 , GT25 , GT21 , SoftGOT2000 , GOT3000 Series , GT37 , SoftGOT3000
Ethernet connection between multiple GOTs and the QnUDVCPU

The following shows an example of settings to connect multiple GOTs to the built-in Ethernet port of the QnUDVCPU via Ethernet. 1. Configure the following s... More Details >>
- No：23443
- Release Date：2018/09/14 15:06
- Update：2025/10/16 14:21
- Category： GOT2000 Series , GT27 , GT25 , GT21 , GOT3000 Series , GT37
IP address settings when connecting the GOT to a PLC via Ethernet

When connecting the GOT to a PLC via Ethernet, set the IP address of the PLC in the screen design software. ◆ For GT Designer3 (GOT2000) Version 1 Select [... More Details >>
- No：45282
- Release Date：2025/10/22 17:11
- Category： GOT2000 Series , GT27 , GT25 , GT21 , GOT3000 Series , GT37
PLC access from GX Works3 via the GOT

When connecting the personal computer (GX Works3) and the built-in Ethernet interface of the RnCPU via the USB interface of the GOT3000 series or GOT2000 ser... More Details >>
- No：23490
- Release Date：2018/09/14 15:06
- Update：2025/10/09 17:33
- Category： GOT3000 Series , GOT2000 Series , GT27 , GT25 , GT21 , GT37

31-40 of Total 184

Inquiries

page top