If a negative value is displayed instead of 40000 when monitoring the device value on the numerical display, check the n

The method for connecting GT SoftGOT3000 with GX Simulator3 is as follows. * Use GX Works3 Version 1.105K or later. ◆ F

The following shows how to limit numerical display, numerical input, text display, and text input using level authentica

The method of entering a value using numerical keys placed on the same base screen without displaying the key window for

These numbers are specified when accessing the buffer memory of the intelligent function module (bus conversion module).

You cannot operate the objects of the GOT with the gesture function using the SoftGOT-GOT link function, since GT SoftGO

Open settings are required when the communication method of the GOTs is TCP for a single MELSEC iQ-R series controller (

The following describes an example of settings to connect GT SoftGOT2000 and the Ethernet port built in the QnUDVCPU by

The historical graph function displays the device data (logging data) collected using the logging function chronological

The following shows how to set the PLC station number when connecting the GOT to the PLC via Ethernet. Configure the se

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Human Machine Interfaces > Human Machine Interfaces MELHMI-GOT > GT SoftGOT

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

GT SoftGOT

SoftGOT1000(11)

FAQ within [ GT SoftGOT ]

1-10 of Total 35

prev 1 / 4page next

When a negative value is displayed on the numerical display instead of a positive value

If a negative value is displayed instead of 40000 when monitoring the device value on the numerical display, check the numerical display settings in the scre... More Details >>
- No：45250
- Release Date：2025/10/22 17:06
- Category： GOT2000 Series , GT SoftGOT , GT27 , GT25 , GT21 , SoftGOT2000 , GOT3000 Series , GT37 , SoftGOT3000
How to connect GT SoftGOT3000 with GX Simulator3

The method for connecting GT SoftGOT3000 with GX Simulator3 is as follows. * Use GX Works3 Version 1.105K or later. ◆ For GT SoftGOT3000 Version 1 1. Disp... More Details >>
- No：45285
- Release Date：2025/10/22 17:11
- Category： GT SoftGOT , SoftGOT3000
Limiting numerical display, numerical input, text display, and text input using level authentication (password authentication)

The following shows how to limit numerical display, numerical input, text display, and text input using level authentication. Configure the settings in the ... More Details >>
- No：45281
- Release Date：2025/10/22 17:11
- Category： GOT3000 Series , GT SoftGOT , GT37 , SoftGOT3000
How to enter a value using numerical keys placed on the same base screen without displaying the key window for numerical input

The method of entering a value using numerical keys placed on the same base screen without displaying the key window for numerical input is as follows: Conf... More Details >>
- No：45284
- Release Date：2025/10/23 10:54
- Category： GOT3000 Series , GT SoftGOT , GT37 , SoftGOT3000
I/O numbers and module number of the MELSEC series

These numbers are specified when accessing the buffer memory of the intelligent function module (bus conversion module). The number assignment method differ... More Details >>
- No：45253
- Release Date：2025/10/22 17:07
- Category： GOT2000 Series , GT SoftGOT , GT27 , GT25 , GT21 , SoftGOT2000 , GOT3000 Series , GT37 , SoftGOT3000
Operating the objects with the gesture function using the SoftGOT-GOT link function

You cannot operate the objects of the GOT with the gesture function using the SoftGOT-GOT link function, since GT SoftGOT2000 does not support the gesture fu... More Details >>
- No：23464
- Release Date：2018/09/14 15:06
- Category： GOT2000 Series , GT SoftGOT , GT27 , SoftGOT2000
Open settings for connection to the built-in Ethernet port of the MELSEC iQ-R series

Open settings are required when the communication method of the GOTs is TCP for a single MELSEC iQ-R series controller (built-in Ethernet port). Configure t... More Details >>
- No：45267
- Release Date：2025/10/22 17:10
- Category： GOT2000 Series , GT SoftGOT , GT27 , GT25 , GT21 , SoftGOT2000 , GOT3000 Series , GT37 , SoftGOT3000
Ethernet connection between GT SoftGOT2000 and a PLC

The following describes an example of settings to connect GT SoftGOT2000 and the Ethernet port built in the QnUDVCPU by Ethernet. 1. Configure the followi... More Details >>
- No：23447
- Release Date：2018/09/14 15:06
- Update：2020/01/07 16:57
- Category： GOT2000 Series , SoftGOT2000
Historical trend graph function

The historical graph function displays the device data (logging data) collected using the logging function chronologically in a graph. This function, unlike... More Details >>
- No：45242
- Release Date：2025/10/22 17:03
- Category： GOT1000 Series , GOT2000 Series , GT SoftGOT , GT27 , GT25 , GT21 , GT15 , GT16 , GT14 , SoftGOT2000 , SoftGOT1000 , GOT3000 Series , GT37 , SoftGOT3000
Setting the PLC station number when connecting the GOT to the PLC via Ethernet

The following shows how to set the PLC station number when connecting the GOT to the PLC via Ethernet. Configure the settings in the screen design software.... More Details >>
- No：45293
- Release Date：2025/10/22 17:12
- Category： GOT2000 Series , GT SoftGOT , GT27 , GT25 , GT21 , SoftGOT2000 , GOT3000 Series , GT37 , SoftGOT3000

1-10 of Total 35

Inquiries

page top