The following shows how to place the countdown timer on the screen using the timer device of the PLC. Set the numerical

The following shows how to limit numerical display, numerical input, text display, and text input using level authentica

The method of entering a value using numerical keys placed on the same base screen without displaying the key window for

The method for connecting GT SoftGOT3000 with GX Simulator3 is as follows. * Use GX Works3 Version 1.105K or later. ◆ F

The alarm popup display function can display the current alarm information in the foreground. Configure the settings in

The screen save can be controlled from the PLC. Use the system information (read device). When the Forced Screen Saver

If a negative value is displayed instead of 40000 when monitoring the device value on the numerical display, check the n

These numbers are specified when accessing the buffer memory of the intelligent function module (bus conversion module).

The following methods are available to capture the screen displayed on the GOT. 1. Use the preview function in the scre

If the touch switch is not displayed on the GOT, check the switch setting in the screen creation software. ◆ For GT Desi

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Human Machine Interfaces > Human Machine Interfaces MELHMI-GOT > GT SoftGOT

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

GT SoftGOT

SoftGOT1000(11)

FAQ within [ GT SoftGOT ]

1-10 of Total 35

prev 1 / 4page next

How to place a countdown timer on the screen using the timer device of the PLC

The following shows how to place the countdown timer on the screen using the timer device of the PLC. Set the numerical display with the screen design softw... More Details >>
- No：45252
- Release Date：2025/10/22 17:06
- Category： GOT2000 Series , GT SoftGOT , GT27 , GT25 , GT21 , SoftGOT2000 , GOT3000 Series , GT37 , SoftGOT3000
Limiting numerical display, numerical input, text display, and text input using level authentication (password authentication)

The following shows how to limit numerical display, numerical input, text display, and text input using level authentication. Configure the settings in the ... More Details >>
- No：45281
- Release Date：2025/10/22 17:11
- Category： GOT3000 Series , GT SoftGOT , GT37 , SoftGOT3000
How to enter a value using numerical keys placed on the same base screen without displaying the key window for numerical input

The method of entering a value using numerical keys placed on the same base screen without displaying the key window for numerical input is as follows: Conf... More Details >>
- No：45284
- Release Date：2025/10/23 10:54
- Category： GOT3000 Series , GT SoftGOT , GT37 , SoftGOT3000
How to connect GT SoftGOT3000 with GX Simulator3

The method for connecting GT SoftGOT3000 with GX Simulator3 is as follows. * Use GX Works3 Version 1.105K or later. ◆ For GT SoftGOT3000 Version 1 1. Disp... More Details >>
- No：45285
- Release Date：2025/10/22 17:11
- Category： GT SoftGOT , SoftGOT3000
Alarm scrolling display

The alarm popup display function can display the current alarm information in the foreground. Configure the settings in the screen design software. ◆ For G... More Details >>
- No：45292
- Release Date：2025/10/22 17:12
- Category： GOT2000 Series , GT SoftGOT , Engineering Software , GT27 , GT25 , GT21 , SoftGOT2000 , HMI/GOT Screen Design Software , GOT3000 Series , GT37 , SoftGOT3000
How to control the screen saver from the PLC

The screen save can be controlled from the PLC. Use the system information (read device). When the Forced Screen Saver Enable signal (System signal 1-1.b1)... More Details >>
- No：45248
- Release Date：2025/10/22 17:06
- Category： GOT2000 Series , GT SoftGOT , GT27 , GT25 , GT21 , SoftGOT2000 , GOT3000 Series , GT37 , SoftGOT3000
When a negative value is displayed on the numerical display instead of a positive value

If a negative value is displayed instead of 40000 when monitoring the device value on the numerical display, check the numerical display settings in the scre... More Details >>
- No：45250
- Release Date：2025/10/22 17:06
- Category： GOT2000 Series , GT SoftGOT , GT27 , GT25 , GT21 , SoftGOT2000 , GOT3000 Series , GT37 , SoftGOT3000
I/O numbers and module number of the MELSEC series

These numbers are specified when accessing the buffer memory of the intelligent function module (bus conversion module). The number assignment method differ... More Details >>
- No：45253
- Release Date：2025/10/22 17:07
- Category： GOT2000 Series , GT SoftGOT , GT27 , GT25 , GT21 , SoftGOT2000 , GOT3000 Series , GT37 , SoftGOT3000
How to capture the screen displayed on the GOT

The following methods are available to capture the screen displayed on the GOT. 1. Use the preview function in the screen design software. 2. Select [Proje... More Details >>
- No：45264
- Release Date：2025/10/22 17:09
- Category： Engineering Software , GOT2000 Series , GT SoftGOT , GT27 , GT25 , GT21 , SoftGOT2000 , HMI/GOT Screen Design Software , GOT3000 Series , GT37 , SoftGOT3000
Touch switch not displayed on the GOT

If the touch switch is not displayed on the GOT, check the switch setting in the screen creation software. ◆ For GT Designer3 (GOT3000) Version 1 If the fo... More Details >>
- No：45269
- Release Date：2025/10/22 17:10
- Category： GOT3000 Series , GOT2000 Series , GT SoftGOT , Engineering Software , GT27 , GT25 , GT21 , SoftGOT2000 , HMI/GOT Screen Design Software , GT37 , SoftGOT3000

1-10 of Total 35

Inquiries

page top