When the AC waveform distorted due to harmonics, the value changes. (For AC without harmonics, the calculated value will

A circuit breaker must have interrupting ratings. These are classified as rated short-circuit breaking capacities in IEC

IEC 60947-2 is an international standard for circuit breakers. The rated voltage for the applicable circuit breaker is 1

Switch disconnector is a switch compatible with IEC 60947-3 standard, and it has no overcurrent tripping element. Please

It is a characteristic that operating time inversely become shorter as current increases. For Molded Case Circuit Breake

When it is connected as special connection, AC/DC compatible circuit breaker can be used with DC 250V or more (3-pole ty

It is no influence on operating and characteristics even in the following cases. 1. Overcurrent 20 times of rated curr

It is forbidden to change the characteristic when the breaker ON. Over current trip and earth leakage trip characteristi

1) For the main body of ME96: Please set the following values on the “Set-up menu 2”. In case of MODBUS RTU S

Operating ambient temperature is set to - 10℃ to 40℃. ( However, its average over a period of 24h does not exceed 35℃.)

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Low-voltage Power Distribution Products

Low-voltage Circuit Breakers(124)

Air Circuit Breakers(23)
Molded Case Circuit Breakers(49)
Earth Leakage Circuit Breakers(21)
Circuit Breakers for Equipment(2)
Circuit Breakers for Use in Particular Applications(6)
Accessories and Related Components(21)
Miniature Circuit Breakers(2)
Contactors and Motor Starters(142)

Motor Starters(142)

Power Management Meters(57)

Electrical Indicators(57)

FAQ within [ Low-voltage Power Distribution Products ]

281-290 of Total 322

prev 29 / 33page next

Difference between measurement value of active power and calculated power value obtained from current, voltage and power factor (ME96SS series).

When the AC waveform distorted due to harmonics, the value changes. (For AC without harmonics, the calculated value will match with the displayed value.) A... More Details >>
- No：22178
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:56
- Category： Electrical Indicators
Interrupting ratings

A circuit breaker must have interrupting ratings. These are classified as rated short-circuit breaking capacities in IEC 60947-2.e rated ultimate short-circu... More Details >>
- No：22341
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
IEC60947-2 standard

IEC 60947-2 is an international standard for circuit breakers. The rated voltage for the applicable circuit breaker is 1000V AC or less, or DC 1500V DC or le... More Details >>
- No：22361
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
Switch disconnector

Switch disconnector is a switch compatible with IEC 60947-3 standard, and it has no overcurrent tripping element. Please use it as a switch with large switch... More Details >>
- No：22379
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
Inverse time delay operating characteristic

It is a characteristic that operating time inversely become shorter as current increases. For Molded Case Circuit Breakers, protection characteristic meeting... More Details >>
- No：22387
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
Max. operational voltage for AC/DC Common

When it is connected as special connection, AC/DC compatible circuit breaker can be used with DC 250V or more (3-pole type is DC400V and 4-pole type is DC500... More Details >>
- No：22445
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
Tolerance for overload (ME96SS series).

It is no influence on operating and characteristics even in the following cases. 1. Overcurrent 20 times of rated current is applied for 0.5 second. 2. Ov... More Details >>
- No：22159
- Release Date：2018/08/27 16:41
- Category： Electrical Indicators
Setting change operation while power is on

It is forbidden to change the characteristic when the breaker ON. Over current trip and earth leakage trip characteristics should be changed by a person with... More Details >>
- No：37699
- Release Date：2020/01/18 09:58
- Category： Molded Case Circuit Breakers , Air Circuit Breakers
Setting for communication (ME96SS series).

1) For the main body of ME96: Please set the following values on the “Set-up menu 2”. In case of MODBUS RTU 　 Set-up menu No. Setti... More Details >>
- No：22181
- Release Date：2018/08/27 16:41
- Update：2020/04/10 17:05
- Category： Electrical Indicators
Use in 40℃～60℃

Operating ambient temperature is set to - 10℃ to 40℃. ( However, its average over a period of 24h does not exceed 35℃.) In the case that the ambient temperat... More Details >>
- No：22370
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers

281-290 of Total 322

Inquiries

page top