It is unnecessary. (It is necessary to prepare an auxiliary power supply which supplies power between MA and MB.)

Please check the register addresses. The register address for the present value of the power factor of each phase is “

Please select rated current sensitivity ,according to the protection purpose and the protective grounding resistance val

It is same as the maximum rated operational voltage.

When it is connected as special connection, AC/DC compatible circuit breaker can be used with DC 250V or more (3-pole ty

It is a starting method that motor winding is star-connected and startingcurrent is set as one-third of direct-on-line a

It is utilization category specified in IEC 60947-4-1. AC-3 category is usedfor starting a motor or stopping during oper

Since it is necessary to energize the pole containing a heater element of athermal load relay, you need to connect it to

It is a current that can be energized for 8 hours without opening/closingthe magnetic contactor and in the state that th

It is recommended to replace in 10 years or specified number of operatingcycles in the standard.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Low-voltage Power Distribution Products

Low-voltage Circuit Breakers(124)

Air Circuit Breakers(23)
Molded Case Circuit Breakers(49)
Earth Leakage Circuit Breakers(21)
Circuit Breakers for Equipment(2)
Circuit Breakers for Use in Particular Applications(6)
Accessories and Related Components(21)
Miniature Circuit Breakers(2)
Contactors and Motor Starters(142)

Motor Starters(142)

Power Management Meters(57)

Electrical Indicators(57)

FAQ within [ Low-voltage Power Distribution Products ]

61-70 of Total 322

prev 7 / 33page next

Wiring for only measuring current (ME96SS series).

It is unnecessary. (It is necessary to prepare an auxiliary power supply which supplies power between MA and MB.) More Details >>
- No：22174
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:50
- Category： Electrical Indicators
Indication values of the main body is different from an obtained value through MODBUS RTU/ TCP (ME96SS series).

Please check the register addresses. The register address for the present value of the power factor of each phase is “0789”. There are the register addre... More Details >>
- No：22191
- Release Date：2018/08/27 16:41
- Category： Electrical Indicators
Select rated current sensitivity

Please select rated current sensitivity ,according to the protection purpose and the protective grounding resistance value of the load equipment. If you alre... More Details >>
- No：22346
- Release Date：2018/08/31 14:33
- Category： Earth Leakage Circuit Breakers
ELCB Rated insulation voltage

It is same as the maximum rated operational voltage. More Details >>
- No：22365
- Release Date：2018/08/31 14:33
- Category： Earth Leakage Circuit Breakers
Max. operational voltage for AC/DC Common

When it is connected as special connection, AC/DC compatible circuit breaker can be used with DC 250V or more (3-pole type is DC400V and 4-pole type is DC500... More Details >>
- No：22445
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
About Low-voltage Power Distribution Products

It is a starting method that motor winding is star-connected and startingcurrent is set as one-third of direct-on-line and then it is delta-connectedafter ac... More Details >>
- No：23237
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

It is utilization category specified in IEC 60947-4-1. AC-3 category is usedfor starting a motor or stopping during operation etc. More Details >>
- No：23241
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

Since it is necessary to energize the pole containing a heater element of athermal load relay, you need to connect it to both side of 3 poles（Between 1/L1-2/... More Details >>
- No：23249
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

It is a current that can be energized for 8 hours without opening/closingthe magnetic contactor and in the state that the temperature rise value ofeach part ... More Details >>
- No：23255
- Release Date：2018/09/12 15:11
- Category： Motor Starters
About Low-voltage Power Distribution Products

It is recommended to replace in 10 years or specified number of operatingcycles in the standard. More Details >>
- No：23268
- Release Date：2018/09/12 15:11
- Category： Motor Starters

61-70 of Total 322

Inquiries

page top