Using Logging Unit Utility (free software), it is able to create a daily/monthly report using logging data acquired by t

Please confirm as below. * Correct IP address? * Correct subnet mask? * Correct proxy setting on PC? * Correct LAN

There is no way to detect a disconnection or communications error in the Energy measuring Unit. As an alternative ide

Sample programs are described in Programming Manual. Please refer to MODBUS Interface specifications (LSPY-9025) and M

MEASURE LED lights while measuring electric power over 0.4% of the total load power. Check below points: 1. Is voltage

Since the setting value is stored into nonvolatile memory, it will not be lost. The clock, logging data and system log

The function calculates the value of each measurement element of voltage, power factor by inputting only current using s

Connectable. Provided that it is impossible to extend a measuring circuit for insulation monitoring.

Match the setting values with EMU4-PX4 and EcoWebServerIII. No need to consider one-cycle operation because it is autom

For 3P4W circuits, set the VT primary voltage value (between L and N). Except for 3P4W circuits, set the VT primary vol

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Energy Saving Supporting Devices

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Energy Saving Supporting Devices

Energy Saving Supporting Devices(49)

Energy Measuring Units(36)
Energy Saving Data Collecting Servers(13)

FAQ within [ Energy Saving Supporting Devices ]

11-20 of Total 47

prev 2 / 5page next

Method for creating a daily/monthly report using logging data (Model: EMU4-LM).

Using Logging Unit Utility (free software), it is able to create a daily/monthly report using logging data acquired by the Logging Unit for the Energy Measur... More Details >>
- No：22120
- Release Date：2018/08/27 16:41
- Category： Energy Measuring Units
Connection failure upon one-to-one connecting a PC with EcoWebServerIII.

Please confirm as below. * Correct IP address? * Correct subnet mask? * Correct proxy setting on PC? * Correct LAN cable (no disconnection)? * Correct... More Details >>
- No：22115
- Release Date：2018/08/27 16:41
- Category： Energy Saving Data Collecting Servers
Checking the disconnection or communications error status of the Energy measuring Unit

There is no way to detect a disconnection or communications error in the Energy measuring Unit. As an alternative idea, we have two solutions to monitor t... More Details >>
- No：38043
- Release Date：2021/02/25 17:54
- Category： Energy Saving Data Collecting Servers
Sample program for MODBUS RTU communication(EcoMonitorPlus/EcoMonitorLight)

Sample programs are described in Programming Manual. Please refer to MODBUS Interface specifications (LSPY-9025) and MODBUS Interface soecifications(LSPY-9... More Details >>
- No：24806
- Release Date：2019/03/27 12:12
- Category： Energy Measuring Units
MEASURE LED not blink (EcoMonitorPlus).

MEASURE LED lights while measuring electric power over 0.4% of the total load power. Check below points: 1. Is voltage wiring connected? 2. Are the trans... More Details >>
- No：22144
- Release Date：2018/08/27 16:41
- Category： Energy Measuring Units
As to compensation for power failure of Logging Unit for the Energy Measuring Unit.

Since the setting value is stored into nonvolatile memory, it will not be lost. The clock, logging data and system log data are retained as long as a batter... More Details >>
- No：22138
- Release Date：2018/08/27 16:41
- Update：2018/09/07 13:07
- Category： Energy Measuring Units
As to simple measuring function of the EcoMonitorPlus (Model: EMU4-BM1-MB、EMU4-HM1-MB、EMU4-A2、EMU4-VA2).

The function calculates the value of each measurement element of voltage, power factor by inputting only current using setting value. This function is used... More Details >>
- No：22127
- Release Date：2018/08/27 16:41
- Category： Energy Measuring Units
As to connecting an Extension Unit for an Insulation Monitor Model (Model: EMU4-LG1-MB).

Connectable. Provided that it is impossible to extend a measuring circuit for insulation monitoring. More Details >>
- No：22123
- Release Date：2018/08/27 16:41
- Category： Energy Measuring Units
Pulse magnification setting of EMU4-PX4(Pulse Input Unit)

Match the setting values with EMU4-PX4 and EcoWebServerIII. No need to consider one-cycle operation because it is automatically calculated in EcoWebServerII... More Details >>
- No：38041
- Release Date：2021/02/25 17:54
- Category： Energy Measuring Units , Energy Saving Data Collecting Servers
EcoWebServerIII's rated voltage value setting with VT connections

For 3P4W circuits, set the VT primary voltage value (between L and N). Except for 3P4W circuits, set the VT primary voltage value (between L and L). <Re... More Details >>
- No：38040
- Release Date：2021/02/25 17:54
- Category： Energy Measuring Units , Energy Saving Data Collecting Servers

11-20 of Total 47

Inquiries

page top