Use an extension cable (Model: EMU2-CB-T1M / EMU2-CB-T5M/EMU2-CB-T10M / EMU2-CB-T1MS / EMU2-CB-T5MS / EMU2-CB-T10MS) for

Attach a current transformer (CT) whose secondary current is 5A to the measuring point, then connect a split-type 5A cur

Since the EMU4-LM performs data logging, it is possible to log the data even in a state of removing the SD memory card.

(1) Open the front cover on the server section, and set the MODE switch to the "STOP" position. (2) Set the RESET switc

The timing for ejecting an SD memory card is specified as below table according to the state of the [SD C.] LED of the L

Since location of the decimal point or units of the measured value displayed is decided by Total load power, it is impos

Connectable. Provided that it is impossible to extend a measuring circuit for insulation monitoring.

Setting different logging ID enables that one SD memory card can be used for several Logging Units. Settable logging ID

Error No.00１（EcoMoni

Error "No. 001" means start failure of CC-Link communication unit. Please try either step. Solution：・Press and hold

It is possible to simultaneously collect data by MODBUS RTU communication and Optional Unit connected. Provided that M

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Energy Saving Supporting Devices

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Energy Saving Supporting Devices

Energy Saving Supporting Devices(49)

Energy Measuring Units(36)
Energy Saving Data Collecting Servers(13)

FAQ within [ Energy Saving Supporting Devices ]

31-40 of Total 47

prev 4 / 5page next

Extension of current sensor cable (EcoMonitorPlus/Light).

Use an extension cable (Model: EMU2-CB-T1M / EMU2-CB-T5M/EMU2-CB-T10M / EMU2-CB-T1MS / EMU2-CB-T5MS / EMU2-CB-T10MS) for extending the cable between EcoMonit... More Details >>
- No：22118
- Release Date：2018/08/27 16:41
- Update：2018/09/07 11:47
- Category： Energy Measuring Units
Method for measuring a circuit over 600A (EcoMonitorPlus/Light).

Attach a current transformer (CT) whose secondary current is 5A to the measuring point, then connect a split-type 5A current sensor (Model: EMU-CT5-A, EMU2-C... More Details >>
- No：22119
- Release Date：2018/08/27 16:41
- Update：2018/09/07 11:38
- Category： Energy Measuring Units
As to logging after removing an SD memory card.

Since the EMU4-LM performs data logging, it is possible to log the data even in a state of removing the SD memory card. Provided that the period for data l... More Details >>
- No：22134
- Release Date：2018/08/27 16:41
- Category： Energy Measuring Units
Checking the IP address of EcoWebServerIII

(1) Open the front cover on the server section, and set the MODE switch to the "STOP" position. (2) Set the RESET switch to the "SEL." position. (3) After ... More Details >>
- No：38044
- Release Date：2021/02/25 17:54
- Category： Energy Saving Data Collecting Servers
As to ejecting an SD memory card.

The timing for ejecting an SD memory card is specified as below table according to the state of the [SD C.] LED of the Logging Unit for the Energy Measuring ... More Details >>
- No：22121
- Release Date：2018/08/27 16:41
- Update：2018/09/07 13:04
- Category： Energy Measuring Units
As to changing location of the decimal point and units of the measured value.

Since location of the decimal point or units of the measured value displayed is decided by Total load power, it is impossible to change location of the decim... More Details >>
- No：22139
- Release Date：2018/08/27 16:41
- Category： Energy Measuring Units
As to connecting an Extension Unit for an Insulation Monitor Model (Model: EMU4-LG1-MB).

Connectable. Provided that it is impossible to extend a measuring circuit for insulation monitoring. More Details >>
- No：22123
- Release Date：2018/08/27 16:41
- Category： Energy Measuring Units
As to using SD memory card at multiple locations.

Setting different logging ID enables that one SD memory card can be used for several Logging Units. Settable logging ID is 1 to 255. More Details >>
- No：22132
- Release Date：2018/08/27 16:41
- Category： Energy Measuring Units
Error No.00１（EcoMonitorPlus, EcoMonitorLight）

Error "No. 001" means start failure of CC-Link communication unit. Please try either step. Solution：・Press and hold the reset button of CC-Link communica... More Details >>
- No：24810
- Release Date：2019/03/27 14:44
- Category： Energy Measuring Units
Simultaneous data acquisition of MODBUS RTU communication and Optional Unit.

It is possible to simultaneously collect data by MODBUS RTU communication and Optional Unit connected. Provided that MODBUS RTU communication cannot collec... More Details >>
- No：22140
- Release Date：2018/08/27 16:41
- Category： Energy Measuring Units

31-40 of Total 47

Inquiries

page top