Sample program for CC-LINK communicat...
Sample programs are described in Programming Manual. Please refer to suitable programming manual depending on CC-Link version which you use. ・Energy Measur... More Details >>
Indication values of the main body is...
Please check the register addresses. The register address for the present value of the power factor of each phase is “0789”. There are the register addre... More Details >>
Connectable number of MODBUS RTU (ME9...
It is connectable with up to 31 units. It is necessary to prepare at least 3 PCs for connecting with 64 units. (31 units + 31 units + 2 units) More Details >>
Active energy (lower digit indication...
Regardless of setting, the value of the default digit length is replied. When the register address “1304” for 6-digit display is set, the value varies w... More Details >>
Concurrent-use of MODBUS RTU and MODB...
MODBUS RTU communication and MODBUS TCP communication can be used at the same time. More Details >>
Acquired values through MODBUS RTU.
The acquired value by communication should be multiplied by the multiplying factor to change into the measurement value. Please refer to Section 7.3 of ... More Details >>
Setting for communication (ME96SS ser...
1) For the main body of ME96: Please set the following values on the “Set-up menu 2”. In case of MODBUS RTU Set-up menu No. Setti... More Details >>
Validation method for communication f...
This model has the test function of the communication operation. For detail, refer to User's Manual: Detailed Edition for setting. More Details >>
Difference between measurement value ...
When the AC waveform distorted due to harmonics, the value changes. (For AC without harmonics, the calculated value will match with the displayed value.) A... More Details >>
Measuring received energy and the tra...
It is possible to measure the received energy and the transferred energy separately. More Details >>
41-50 of Total 103