Validation method for communication f...
This model has the test function of the communication operation. For detail, refer to User's Manual: Detailed Edition for setting. More Details >>
Difference between measurement value ...
When the AC waveform distorted due to harmonics, the value changes. (For AC without harmonics, the calculated value will match with the displayed value.) A... More Details >>
Measurement value different from othe...
In general, in case of measurement by the average method, the waveform including harmonics cause large error. This model uses the RMS value method and measu... More Details >>
Measuring received energy and the tra...
It is possible to measure the received energy and the transferred energy separately. More Details >>
Disable an alarm for motor starting c...
This model has “Motor Starting Current Mask Function”. This function stops the alarm output and updating of the maximum values during the setting time when a... More Details >>
Wiring for only measuring current (ME...
It is unnecessary. (It is necessary to prepare an auxiliary power supply which supplies power between MA and MB.) More Details >>
Display upon upper/lower limit alarm ...
The measurement elements, including the digital indication, the unit indication and the phase indication, flash. And the “ALARM” indication and the “HI” in... More Details >>
Initialization the set values (ME96SS...
It is possible to initialize set values depending on setting. The method of initializing the setting value differs depending on the model. More Details >>
Checking the set values (ME96SS series).
Pressing the buttons of the “Set” for 2 seconds or more shifts the mode to the “Setting Value Confirmation Mode”. It is impossible to change the set values... More Details >>
Power supply upon setting (ME96SS ser...
It is necessary to supply an auxiliary power. As for an auxiliary power supply, you can use 50 Hz or 60 Hz from 100 VAC to 240 VAC and from 100 VDC to 240... More Details >>
81-90 of Total 103