In general, in case of measurement by the average method, the waveform including harmonics cause large error. This model

In case of the input voltage of less than 11 V, the measurement values are as follows: Voltage: 0 V, Power supply: 0 W

This model is compliant with CE marking, UL standard, KC Mark and FCC/IC.

Regardless of setting, the value of the default digit length is replied. When the register address “1304” for 6-digit

It is no problem. The memorized data such as active energy, reactive energy, and apparent energy is not deleted. The me

Sample programs are described in Programming Manual. Please refer to suitable programming manual depending on CC-Link ve

It depends on the service conditions. Refer to the following guidelines. ① Contact output Contact output for ME96 s

This model is able to be used under unusual primary current and unusual primary voltage as long as the user sets each v

No, it is impossible. But Multi-drop connection is possible. For details, refer to connection examples as below.

Accuracy class index of active energy is a number which gives the limits of the permissible percentage error as defined

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products > Power Management Meters

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Power Management Meters

Electrical Indicators(57)

FAQ within [ Power Management Meters ]

1-10 of Total 57

prev 1 / 6page next

Measurement value different from other measuring instrument (ME96SS series).

In general, in case of measurement by the average method, the waveform including harmonics cause large error. This model uses the RMS value method and measu... More Details >>
- No：22177
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:54
- Category： Electrical Indicators
Measurable minimum voltage (ME96SS series).

In case of the input voltage of less than 11 V, the measurement values are as follows: Voltage: 0 V,Power supply: 0 W, Reactive power: 0 var, Apparent pow... More Details >>
- No：22156
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:08
- Category： Electrical Indicators
Standards for this model (ME96SS series).

This model is compliant with CE marking, UL standard, KC Mark and FCC/IC. More Details >>
- No：22146
- Release Date：2018/08/27 16:41
- Update：2020/04/10 14:27
- Category： Electrical Indicators
Active energy (lower digit indication) display upon communication test of MODBUS RTU/TCP communication (ME96SS series).

Regardless of setting, the value of the default digit length is replied. When the register address “1304” for 6-digit display is set, the value varies w... More Details >>
- No：22189
- Release Date：2018/08/27 16:41
- Update：2020/04/13 09:26
- Category： Electrical Indicators
Availability for changing set values while operating (ME96SS series).

It is no problem. The memorized data such as active energy, reactive energy, and apparent energy is not deleted. The measurement is continued during setti... More Details >>
- No：22164
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:19
- Category： Electrical Indicators
Sample program for CC-LINK communication （ME96SS series）

Sample programs are described in Programming Manual. Please refer to suitable programming manual depending on CC-Link version which you use. ・Programming M... More Details >>
- No：24804
- Release Date：2019/03/27 12:12
- Category： Electrical Indicators
Wire length for analog output and contact output（ME96SS series）

It depends on the service conditions. Refer to the following guidelines. ① Contact output Contact output for ME96 series is no-voltage "a" contact. The... More Details >>
- No：24807
- Release Date：2019/03/27 12:12
- Category： Electrical Indicators
Availability for special primary current and special primary voltage (ME96SS series).

This model is able to be used under unusual primary current and unusual primary voltage as long as the user sets each value within the selectable range as ... More Details >>
- No：22148
- Release Date：2018/08/27 16:41
- Update：2020/04/10 15:15
- Category： Electrical Indicators
Branch connection for MODBUS RTU communication

No, it is impossible. But Multi-drop connection is possible. For details, refer to connection examples as below. More Details >>
- No：24808
- Release Date：2019/03/27 14:44
- Category： Electrical Indicators , Energy Measuring Units
Accuracy class index of active energy

Accuracy class index of active energy is a number which gives the limits of the permissible percentage error as defined in the IEC62053-22. More Details >>
- No：37704
- Release Date：2020/01/29 18:36
- Category： Electrical Indicators

1-10 of Total 57

Inquiries

page top