It is impossible to turn off the LCD. It is possible to turn off back lights. When any button is not pressed for 5 minu

Storage temperature range: -25 °C to +75 °C Operating temperature range: -5 °C to +55 °C (Average: 35 °C or lower) Oper

No, it is impossible. But Multi-drop connection is possible. For details, refer to connection examples as below.

This model has “Motor Starting Current Mask Function”. This function stops the alarm output and updating of the maximum

In case of the input current of less than 0.005 A, the measurement values are as follows: Current: 0 A, Power supply:

The acquired digit length of “1280”, “1281” and “1304” varies with the full load power. The acquired digit length of “1

The measurement elements, including the digital indication, the unit indication and the phase indication, flash. And th

When [SET] is flashing, the “Setting Value Confirmation Mode” is selected. In this case, the set values cannot be change

Accuracy class index of active energy is a number which gives the limits of the permissible percentage error as defined

Pressing buttons of the “+” and the “-” at the same time on the measurement screen for 2 seconds shifts the unit of act

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products > Power Management Meters

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Power Management Meters

Electrical Indicators(57)

FAQ within [ Power Management Meters ]

1-10 of Total 57

prev 1 / 6page next

Turning off the LCD display and backlight (ME96SS series).

It is impossible to turn off the LCD. It is possible to turn off back lights. When any button is not pressed for 5 minutes, the automatic off mode setting... More Details >>
- No：22171
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:42
- Category： Electrical Indicators
The operating/storage temperature and humidity

Storage temperature range: -25 °C to +75 °C Operating temperature range: -5 °C to +55 °C (Average: 35 °C or lower) Operating humidity range: 0% to 85% an... More Details >>
- No：22153
- Release Date：2018/08/27 16:41
- Update：2020/04/10 15:56
- Category： Electrical Indicators
Branch connection for MODBUS RTU communication

No, it is impossible. But Multi-drop connection is possible. For details, refer to connection examples as below. More Details >>
- No：24808
- Release Date：2019/03/27 14:44
- Category： Electrical Indicators , Energy Measuring Units
Disable an alarm for motor starting current (ME96SS series).

This model has “Motor Starting Current Mask Function”. This function stops the alarm output and updating of the maximum values during the setting time when a... More Details >>
- No：22175
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:51
- Category： Electrical Indicators
Measurable minimum load (ME96SS series).

In case of the input current of less than 0.005 A, the measurement values are as follows: Current: 0 A, Power supply: 0 W, Reactive power: 0 var, Apparent... More Details >>
- No：22155
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:04
- Category： Electrical Indicators
Register address for active energy monitors in the MODBUS RTU communication (ME96SS series).

The acquired digit length of “1280”, “1281” and “1304” varies with the full load power. The acquired digit length of “1304” is 6-digit. Each of “1280” and... More Details >>
- No：22184
- Release Date：2018/08/27 16:41
- Update：2020/04/10 17:18
- Category： Electrical Indicators
Display upon upper/lower limit alarm (ME96SS series).

The measurement elements, including the digital indication, the unit indication and the phase indication, flash. And the “ALARM” indication and the “HI” in... More Details >>
- No：22169
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:36
- Category： Electrical Indicators
Set values cannot be changed on the setting mode (ME96SS series).

When[SET] is flashing, the “Setting Value Confirmation Mode” is selected. In this case, the set values cannot be changed. Pressing the buttons of the “Set” ... More Details >>
- No：22168
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:22
- Category： Electrical Indicators
Accuracy class index of active energy

Accuracy class index of active energy is a number which gives the limits of the permissible percentage error as defined in the IEC62053-22. More Details >>
- No：37704
- Release Date：2020/01/29 18:36
- Category： Electrical Indicators
Checking non-displayed digit of active energy (ME96SS series).

Pressing buttons of the “+” and the “-” at the same time on the measurement screen for 2 seconds shifts the unit of active energy as follows. The measured ... More Details >>
- No：22172
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:44
- Category： Electrical Indicators

1-10 of Total 57

Inquiries

page top