1) For the main body of ME96: Please set the following values on the “Set-up menu 2”. In case of MODBUS RTU S

Please check the following items. (A) Is the power supplied between MA and MB？ (When the power is not supplied, the disp

It is unnecessary. (It is necessary to prepare an auxiliary power supply which supplies power between MA and MB.)

Pressing buttons of the “+” and the “-” at the same time on the measurement screen for 2 seconds shifts the unit of act

In general, in case of measurement by the average method, the waveform including harmonics cause large error. This model

Pressing the buttons of the “Set” for 2 seconds or more shifts the mode to the “Setting Value Confirmation Mode”. It i

In the case of "6-digit display", the upper 3 digits of "9-digit display" are hidden. For details, refer to the Instrume

Sample programs are described in Programming Manual. Please refer to MODBUS Interface specifications（LSPM-0075） The prog

In a board installation state, the protection class is equivalent to IP50. This model is not waterproof.

In case of the input voltage of less than 11 V, the measurement values are as follows: Voltage: 0 V, Power supply: 0 W

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products > Power Management Meters

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Power Management Meters

Electrical Indicators(57)

FAQ within [ Power Management Meters ]

11-20 of Total 57

prev 2 / 6page next

Setting for communication (ME96SS series).

1) For the main body of ME96: Please set the following values on the “Set-up menu 2”. In case of MODBUS RTU 　 Set-up menu No. Setti... More Details >>
- No：22181
- Release Date：2018/08/27 16:41
- Update：2020/04/10 17:05
- Category： Electrical Indicators
Communication failure with the upper system through MODBUS RTU.

Please check the following items. (A) Is the power supplied between MA and MB？ (When the power is not supplied, the display does not work.) (B) Is the wir... More Details >>
- No：22182
- Release Date：2018/08/27 16:41
- Update：2020/04/10 17:08
- Category： Electrical Indicators
Wiring for only measuring current (ME96SS series).

It is unnecessary. (It is necessary to prepare an auxiliary power supply which supplies power between MA and MB.) More Details >>
- No：22174
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:50
- Category： Electrical Indicators
Checking non-displayed digit of active energy (ME96SS series).

Pressing buttons of the “+” and the “-” at the same time on the measurement screen for 2 seconds shifts the unit of active energy as follows. The measured ... More Details >>
- No：22172
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:44
- Category： Electrical Indicators
Measurement value different from other measuring instrument (ME96SS series).

In general, in case of measurement by the average method, the waveform including harmonics cause large error. This model uses the RMS value method and measu... More Details >>
- No：22177
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:54
- Category： Electrical Indicators
Checking the set values (ME96SS series).

Pressing the buttons of the “Set” for 2 seconds or more shifts the mode to the “Setting Value Confirmation Mode”. It is impossible to change the set values... More Details >>
- No：22165
- Release Date：2018/08/27 16:41
- Category： Electrical Indicators
Display digit of ACTIVE ENERGY

In the case of "6-digit display", the upper 3 digits of "9-digit display" are hidden. For details, refer to the Instrument User's Manual which you use. ・El... More Details >>
- No：24809
- Release Date：2019/03/27 14:44
- Category： Electrical Indicators
Sample program for MODBUS RTU communication （ME96SS series）

Sample programs are described in Programming Manual. Please refer to MODBUS Interface specifications（LSPM-0075） The programming manual can be downloaded fr... More Details >>
- No：24805
- Release Date：2019/03/27 12:12
- Category： Electrical Indicators
IP protection class (ME96SS series).

In a board installation state, the protection class is equivalent to IP50. This model is not waterproof. More Details >>
- No：22158
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:13
- Category： Electrical Indicators
Measurable minimum voltage (ME96SS series).

In case of the input voltage of less than 11 V, the measurement values are as follows: Voltage: 0 V,Power supply: 0 W, Reactive power: 0 var, Apparent pow... More Details >>
- No：22156
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:08
- Category： Electrical Indicators

11-20 of Total 57

Inquiries

page top