It is impossible to turn off the LCD. It is possible to turn off back lights. When any button is not pressed for 5 minu

Storage temperature range: -25 °C to +75 °C Operating temperature range: -5 °C to +55 °C (Average: 35 °C or lower) Oper

This model is able to be used under unusual primary current and unusual primary voltage as long as the user sets each v

No, it is impossible. But Multi-drop connection is possible. For details, refer to connection examples as below.

It is connectable with up to 31 units. It is necessary to prepare at least 3 PCs for connecting with 64 units. (31 uni

Pressing buttons of the “+” and the “-” at the same time on the measurement screen for 2 seconds shifts the unit of act

Please check the register addresses. The register address for the present value of the power factor of each phase is

Regardless of setting, the value of the default digit length is replied. When the register address “1304” for 6-digit

1) For the main body of ME96: Please set the following values on the “Set-up menu 2”. In case of MODBUS RTU S

A reason varies with the connection situation of options. (Please refer to the section 6 of the User’s Manual.) In c

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products > Power Management Meters

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Power Management Meters

Electrical Indicators(57)

FAQ within [ Power Management Meters ]

1-10 of Total 57

prev 1 / 6page next

Turning off the LCD display and backlight (ME96SS series).

It is impossible to turn off the LCD. It is possible to turn off back lights. When any button is not pressed for 5 minutes, the automatic off mode setting... More Details >>
- No：22171
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:42
- Category： Electrical Indicators
The operating/storage temperature and humidity

Storage temperature range: -25 °C to +75 °C Operating temperature range: -5 °C to +55 °C (Average: 35 °C or lower) Operating humidity range: 0% to 85% an... More Details >>
- No：22153
- Release Date：2018/08/27 16:41
- Update：2020/04/10 15:56
- Category： Electrical Indicators
Availability for special primary current and special primary voltage (ME96SS series).

This model is able to be used under unusual primary current and unusual primary voltage as long as the user sets each value within the selectable range as ... More Details >>
- No：22148
- Release Date：2018/08/27 16:41
- Update：2020/04/10 15:15
- Category： Electrical Indicators
Branch connection for MODBUS RTU communication

No, it is impossible. But Multi-drop connection is possible. For details, refer to connection examples as below. More Details >>
- No：24808
- Release Date：2019/03/27 14:44
- Category： Electrical Indicators , Energy Measuring Units
Connectable number of MODBUS RTU (ME96SS series).

It is connectable with up to 31 units. It is necessary to prepare at least 3 PCs for connecting with 64 units. (31 units + 31 units + 2 units) More Details >>
- No：22190
- Release Date：2018/08/27 16:41
- Category： Electrical Indicators
Checking non-displayed digit of active energy (ME96SS series).

Pressing buttons of the “+” and the “-” at the same time on the measurement screen for 2 seconds shifts the unit of active energy as follows. The measured ... More Details >>
- No：22172
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:44
- Category： Electrical Indicators
The power factor does not match the indication values through MODBUS.

Please check the register addresses. The register address for the present value of the power factor of each phase is “0789”. There are the register... More Details >>
- No：37807
- Release Date：2020/04/10 15:10
- Category： Electrical Indicators
Active energy (lower digit indication) display upon communication test of MODBUS RTU/TCP communication (ME96SS series).

Regardless of setting, the value of the default digit length is replied. When the register address “1304” for 6-digit display is set, the value varies w... More Details >>
- No：22189
- Release Date：2018/08/27 16:41
- Update：2020/04/13 09:26
- Category： Electrical Indicators
Setting for communication (ME96SS series).

1) For the main body of ME96: Please set the following values on the “Set-up menu 2”. In case of MODBUS RTU 　 Set-up menu No. Setti... More Details >>
- No：22181
- Release Date：2018/08/27 16:41
- Update：2020/04/10 17:05
- Category： Electrical Indicators
LCD COM is flashing (ME96SS series).

A reason varies with the connection situation of options. (Please refer to the section 6 of the User’s Manual.) In case of MODBUS RTU Error content: ... More Details >>
- No：22186
- Release Date：2018/08/27 16:41
- Update：2020/04/13 09:20
- Category： Electrical Indicators

1-10 of Total 57

Inquiries

page top