Make sure to power OFF of the EcoMonitorLight or EcoMonitorPlus when replacing a battery of the Logging Unit (Model: EMU

The timing for ejecting an SD memory card is specified as below table according to the state of the [SD C.] LED of the L

Since location of the decimal point or units of the measured value displayed is decided by Total load power, it is impos

Sample programs are described in Programming Manual. Please refer to MODBUS Interface specifications (LSPY-9025) and M

It will stop outputting logging data from the Logging Unit. [SD C.] LED will be high-speed blinking （repeat of 0.25sec

As shown in the figure below, a current transformer (CT) with a secondary current of 5A is attached to the measurement l

Since the setting value is stored into nonvolatile memory, it will not be lost. The clock, logging data and system log

The function calculates the value of each measurement element of voltage, power factor by inputting only current using s

It is possible to extend using an extension cable (Model: EMU2-CB-T1M, EMU2-CB-T5M, EMU2-CB-T10M). Secure the total le

(1) Open the front cover on the server section, and set the MODE switch to the "STOP" position. (2) Set the RESET switc

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Energy Saving Supporting Devices > Energy Saving Supporting Devices

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Energy Saving Supporting Devices

FAQ within [ Energy Saving Supporting Devices ]

21-30 of Total 47

prev 3 / 5page next

Cautions for replacing a battery (Model: EMU4-LM).

Make sure to power OFF of the EcoMonitorLight or EcoMonitorPlus when replacing a battery of the Logging Unit (Model: EMU4-LM) for the Energy Measuring Unit. ... More Details >>
- No：22125
- Release Date：2018/08/27 16:41
- Category： Energy Measuring Units
As to ejecting an SD memory card.

The timing for ejecting an SD memory card is specified as below table according to the state of the [SD C.] LED of the Logging Unit for the Energy Measuring ... More Details >>
- No：22121
- Release Date：2018/08/27 16:41
- Update：2018/09/07 13:04
- Category： Energy Measuring Units
As to changing location of the decimal point and units of the measured value.

Since location of the decimal point or units of the measured value displayed is decided by Total load power, it is impossible to change location of the decim... More Details >>
- No：22139
- Release Date：2018/08/27 16:41
- Category： Energy Measuring Units
Sample program for MODBUS RTU communication(EcoMonitorPlus/EcoMonitorLight)

Sample programs are described in Programming Manual. Please refer to MODBUS Interface specifications (LSPY-9025) and MODBUS Interface soecifications(LSPY-9... More Details >>
- No：24806
- Release Date：2019/03/27 12:12
- Category： Energy Measuring Units
As to action upon memory shortage of the SD memory card.

It will stop outputting logging data from the Logging Unit. [SD C.] LED will be high-speed blinking （repeat of 0.25sec ON → 0.25sec OFF）. Backup the data ... More Details >>
- No：22135
- Release Date：2018/08/27 16:41
- Category： Energy Measuring Units
How to measure circuits over 600A (EcoMonitorPlus / Light)

As shown in the figure below, a current transformer (CT) with a secondary current of 5A is attached to the measurement location, and a split-type current sen... More Details >>
- No：38042
- Release Date：2021/02/25 17:54
- Category： Energy Measuring Units
As to compensation for power failure of Logging Unit for the Energy Measuring Unit.

Since the setting value is stored into nonvolatile memory, it will not be lost. The clock, logging data and system log data are retained as long as a batter... More Details >>
- No：22138
- Release Date：2018/08/27 16:41
- Update：2018/09/07 13:07
- Category： Energy Measuring Units
As to simple measuring function of the EcoMonitorPlus (Model: EMU4-BM1-MB、EMU4-HM1-MB、EMU4-A2、EMU4-VA2).

The function calculates the value of each measurement element of voltage, power factor by inputting only current using setting value. This function is used... More Details >>
- No：22127
- Release Date：2018/08/27 16:41
- Category： Energy Measuring Units
Extension of cable of the Display Unit (Model: EMU4-D65).

It is possible to extend using an extension cable (Model: EMU2-CB-T1M, EMU2-CB-T5M, EMU2-CB-T10M). Secure the total length of the extension cable is less t... More Details >>
- No：22122
- Release Date：2018/08/27 16:41
- Category： Energy Measuring Units
Checking the IP address of EcoWebServerIII

(1) Open the front cover on the server section, and set the MODE switch to the "STOP" position. (2) Set the RESET switch to the "SEL." position. (3) After ... More Details >>
- No：38044
- Release Date：2021/02/25 17:54
- Category： Energy Saving Data Collecting Servers

21-30 of Total 47

Inquiries

page top