A dedicated Display Unit (Model: EMU4-D65) is used to set the EcoMonitorPlus (Model ：EMU4-BM1-MB, EMU4-HM1-MB, EMU4-LG1

It will stop outputting logging data from the Logging Unit. [SD C.] LED will be high-speed blinking （repeat of 0.25sec

Following causes are assumed for the error. 1. Wrong orientation of the sensor? 2. 1-side and 3-side of the sensor a

MEASURE LED lights while measuring electric power over 0.4% of the total load power. Check below points: 1. Is voltage

Sample programs are described in Programming Manual. Please refer to suitable programming manual depending on CC-Link ve

The function calculates the value of each measurement element of voltage, power factor by inputting only current using s

Setting different logging ID enables that one SD memory card can be used for several Logging Units. Settable logging ID

EMU4-LM outputs data file at following timing. 1. When inserting the SD memory card while operating. 2. When power

Using Logging Unit Utility (free software), it is able to create a daily/monthly report using logging data acquired by t

Refer to the below table as to Zero-Phase Current Transformer usable for EcoMonitorPlus (Model: EMU4-LG1-MB). Note that

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Energy Saving Supporting Devices > Energy Saving Supporting Devices > Energy Measuring Units

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Energy Measuring Units ]

1-10 of Total 36

prev 1 / 4page next

As to settings for EcoMonitorPlus (Model: EMU4-BM1-MB, EMU4-HM1-MB, EMU4-LG1-MB, EMU4-A2, EMU4-VA2, EMU4-AX4, EMU4-PX4).

A dedicated Display Unit (Model: EMU4-D65) is used to set the EcoMonitorPlus (Model ：EMU4-BM1-MB, EMU4-HM1-MB, EMU4-LG1-MB, EMU4-A2, EMU4-VA2, EMU4-AX4, EMU... More Details >>
- No：22128
- Release Date：2018/08/27 16:41
As to action upon memory shortage of the SD memory card.

It will stop outputting logging data from the Logging Unit. [SD C.] LED will be high-speed blinking （repeat of 0.25sec ON → 0.25sec OFF）. Backup the data ... More Details >>
- No：22135
- Release Date：2018/08/27 16:41
Cause of "minus" indication for electric power value (EcoMonitorPlus/Light).

Following causes are assumed for the error. 1. Wrong orientation of the sensor? 2. 1-side and 3-side of the sensor are reversed? 3. Is connection betwe... More Details >>
- No：22143
- Release Date：2018/08/27 16:41
MEASURE LED not blink (EcoMonitorPlus).

MEASURE LED lights while measuring electric power over 0.4% of the total load power. Check below points: 1. Is voltage wiring connected? 2. Are the trans... More Details >>
- No：22144
- Release Date：2018/08/27 16:41
Sample program for CC-LINK communication （EcoMonitorPlus／EcoMonitorLight）

Sample programs are described in Programming Manual. Please refer to suitable programming manual depending on CC-Link version which you use. ・Energy Measur... More Details >>
- No：24803
- Release Date：2019/03/27 12:12
As to simple measuring function of the EcoMonitorPlus (Model: EMU4-BM1-MB、EMU4-HM1-MB、EMU4-A2、EMU4-VA2).

The function calculates the value of each measurement element of voltage, power factor by inputting only current using setting value. This function is used... More Details >>
- No：22127
- Release Date：2018/08/27 16:41
As to using SD memory card at multiple locations.

Setting different logging ID enables that one SD memory card can be used for several Logging Units. Settable logging ID is 1 to 255. More Details >>
- No：22132
- Release Date：2018/08/27 16:41
As to timing for outputting data file into the SD memory card.

EMU4-LM outputs data file at following timing. 1. When inserting the SD memory card while operating. 2. When power is ON in a state of the SD memory ca... More Details >>
- No：22133
- Release Date：2018/08/27 16:41
Method for creating a daily/monthly report using logging data (Model: EMU4-LM).

Using Logging Unit Utility (free software), it is able to create a daily/monthly report using logging data acquired by the Logging Unit for the Energy Measur... More Details >>
- No：22120
- Release Date：2018/08/27 16:41
As to Zero-Phase Current Transformer (ZCT) usable for the EcoMonitorPlus (Model: EMU4-LG1-MB).

Refer to the below table as to Zero-Phase Current Transformer usable for EcoMonitorPlus (Model: EMU4-LG1-MB). Note that the one made by another company is... More Details >>
- No：22129
- Release Date：2018/08/27 16:41
- Update：2018/08/31 14:17

1-10 of Total 36

Inquiries

page top