It is assumed that setting of "Master/Slave setting switch" at the bottom of the Display Unit (Model: EMU4-D65) for the

No, it is impossible. But Multi-drop connection is possible. For details, refer to connection examples as below.

For 3P4W circuits, set the VT primary voltage value (between L and N). Except for 3P4W circuits, set the VT primary volt

Match the setting values with EMU4-PX4 and EcoWebServerIII. No need to consider one-cycle operation because it is automa

Since location of the decimal point or units of the measured value displayed is decided by Total load power, it is impos

Refer to the below table as to Zero-Phase Current Transformer usable for EcoMonitorPlus (Model: EMU4-LG1-MB). Note that

Error No.00１（EcoMoni

Error "No. 001" means start failure of CC-Link communication unit. Please try either step. Solution：・Press and hold the

Since the EMU4-LM performs data logging, it is possible to log the data even in a state of removing the SD memory card.

It measures from 0kWh(MWh) after going round. Integer 4 digits ： 9999.98→9999.99→0000.00→0000.01kWh(MWh) Integer 5

Setting different logging ID enables that one SD memory card can be used for several Logging Units. Settable logging ID

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Energy Saving Supporting Devices > Energy Saving Supporting Devices > Energy Measuring Units

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Energy Measuring Units ]

1-10 of Total 36

prev 1 / 4page next

Setting of "Master / slave setting switch" (Model: EMU4-D65).

It is assumed that setting of "Master/Slave setting switch" at the bottom of the Display Unit (Model: EMU4-D65) for the Energy Measuring Unit is wrong. Perfo... More Details >>
- No：22126
- Release Date：2018/08/27 16:41
Branch connection for MODBUS RTU communication

No, it is impossible. But Multi-drop connection is possible. For details, refer to connection examples as below. More Details >>
- No：24808
- Release Date：2019/03/27 14:44
EcoWebServerIII's rated voltage value setting with VT connections

For 3P4W circuits, set the VT primary voltage value (between L and N). Except for 3P4W circuits, set the VT primary voltage value (between L and L). <Re... More Details >>
- No：38040
- Release Date：2021/02/25 17:54
Pulse magnification setting of EMU4-PX4(Pulse Input Unit)

Match the setting values with EMU4-PX4 and EcoWebServerIII. No need to consider one-cycle operation because it is automatically calculated in EcoWebServerII... More Details >>
- No：38041
- Release Date：2021/02/25 17:54
As to changing location of the decimal point and units of the measured value.

Since location of the decimal point or units of the measured value displayed is decided by Total load power, it is impossible to change location of the decim... More Details >>
- No：22139
- Release Date：2018/08/27 16:41
As to Zero-Phase Current Transformer (ZCT) usable for the EcoMonitorPlus (Model: EMU4-LG1-MB).

Refer to the below table as to Zero-Phase Current Transformer usable for EcoMonitorPlus (Model: EMU4-LG1-MB). Note that the one made by another company is... More Details >>
- No：22129
- Release Date：2018/08/27 16:41
- Update：2018/08/31 14:17
Error No.00１（EcoMonitorPlus, EcoMonitorLight）

Error "No. 001" means start failure of CC-Link communication unit. Please try either step. Solution：・Press and hold the reset button of CC-Link communica... More Details >>
- No：24810
- Release Date：2019/03/27 14:44
As to logging after removing an SD memory card.

Since the EMU4-LM performs data logging, it is possible to log the data even in a state of removing the SD memory card. Provided that the period for data l... More Details >>
- No：22134
- Release Date：2018/08/27 16:41
As to indication of the measurement value of the electric energy　(EcoMonitorPlus/Light).

It measures from 0kWh(MWh) after going round. Integer 4 digits ： 9999.98→9999.99→0000.00→0000.01kWh(MWh) Integer 5 digits ： 99999.8→99999.9→00000.0→0000... More Details >>
- No：22131
- Release Date：2018/08/27 16:41
As to using SD memory card at multiple locations.

Setting different logging ID enables that one SD memory card can be used for several Logging Units. Settable logging ID is 1 to 255. More Details >>
- No：22132
- Release Date：2018/08/27 16:41

1-10 of Total 36

Inquiries

page top