It will stop outputting logging data from the Logging Unit. [SD C.] LED will be high-speed blinking （repeat of 0.25sec

Refer to the below table as to Zero-Phase Current Transformer usable for EcoMonitorPlus (Model: EMU4-LG1-MB). Note th

EMU4-LM outputs data file at following timing. 1. When inserting the SD memory card while operating. 2. When power

Error No.00１（EcoMoni

Error "No. 001" means start failure of CC-Link communication unit. Please try either step. Solution：・Press and hold

It is possible to simultaneously collect data by MODBUS RTU communication and Optional Unit connected. Provided that M

Since the EMU4-LM performs data logging, it is possible to log the data even in a state of removing the SD memory card.

Attach a current transformer (CT) whose secondary current is 5A to the measuring point, then connect a split-type 5A cur

It is possible to extend using an extension cable (Model: EMU2-CB-T1M, EMU2-CB-T5M, EMU2-CB-T10M). Secure the total le

The function calculates the value of each measurement element of voltage, power factor by inputting only current using s

Sample programs are described in Programming Manual. Please refer to MODBUS Interface specifications (LSPY-9025) and M

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Energy Saving Supporting Devices > Energy Saving Supporting Devices > Energy Measuring Units

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Energy Measuring Units ]

11-20 of Total 36

prev 2 / 4page next

As to action upon memory shortage of the SD memory card.

It will stop outputting logging data from the Logging Unit. [SD C.] LED will be high-speed blinking （repeat of 0.25sec ON → 0.25sec OFF）. Backup the data ... More Details >>
- No：22135
- Release Date：2018/08/27 16:41
As to Zero-Phase Current Transformer (ZCT) usable for the EcoMonitorPlus (Model: EMU4-LG1-MB).

Refer to the below table as to Zero-Phase Current Transformer usable for EcoMonitorPlus (Model: EMU4-LG1-MB). Note that the one made by another company is... More Details >>
- No：22129
- Release Date：2018/08/27 16:41
- Update：2018/08/31 14:17
As to timing for outputting data file into the SD memory card.

EMU4-LM outputs data file at following timing. 1. When inserting the SD memory card while operating. 2. When power is ON in a state of the SD memory ca... More Details >>
- No：22133
- Release Date：2018/08/27 16:41
Error No.00１（EcoMonitorPlus, EcoMonitorLight）

Error "No. 001" means start failure of CC-Link communication unit. Please try either step. Solution：・Press and hold the reset button of CC-Link communica... More Details >>
- No：24810
- Release Date：2019/03/27 14:44
Simultaneous data acquisition of MODBUS RTU communication and Optional Unit.

It is possible to simultaneously collect data by MODBUS RTU communication and Optional Unit connected. Provided that MODBUS RTU communication cannot collec... More Details >>
- No：22140
- Release Date：2018/08/27 16:41
As to logging after removing an SD memory card.

Since the EMU4-LM performs data logging, it is possible to log the data even in a state of removing the SD memory card. Provided that the period for data l... More Details >>
- No：22134
- Release Date：2018/08/27 16:41
Method for measuring a circuit over 600A (EcoMonitorPlus/Light).

Attach a current transformer (CT) whose secondary current is 5A to the measuring point, then connect a split-type 5A current sensor (Model: EMU-CT5-A, EMU2-C... More Details >>
- No：22119
- Release Date：2018/08/27 16:41
- Update：2018/09/07 11:38
Extension of cable of the Display Unit (Model: EMU4-D65).

It is possible to extend using an extension cable (Model: EMU2-CB-T1M, EMU2-CB-T5M, EMU2-CB-T10M). Secure the total length of the extension cable is less t... More Details >>
- No：22122
- Release Date：2018/08/27 16:41
As to simple measuring function of the EcoMonitorPlus (Model: EMU4-BM1-MB、EMU4-HM1-MB、EMU4-A2、EMU4-VA2).

The function calculates the value of each measurement element of voltage, power factor by inputting only current using setting value. This function is used... More Details >>
- No：22127
- Release Date：2018/08/27 16:41
Sample program for MODBUS RTU communication(EcoMonitorPlus/EcoMonitorLight)

Sample programs are described in Programming Manual. Please refer to MODBUS Interface specifications (LSPY-9025) and MODBUS Interface soecifications(LSPY-9... More Details >>
- No：24806
- Release Date：2019/03/27 12:12

11-20 of Total 36

Inquiries

page top