It is possible to extend using an extension cable (Model: EMU2-CB-T1M, EMU2-CB-T5M, EMU2-CB-T10M). Secure the total le

It will stop outputting logging data from the Logging Unit. [SD C.] LED will be high-speed blinking （repeat of 0.25sec

Sample programs are described in Programming Manual. Please refer to MODBUS Interface specifications (LSPY-9025) and M

MEASURE LED lights while measuring electric power over 0.4% of the total load power. Check below points: 1. Is voltage

It measures from 0kWh(MWh) after going round. Integer 4 digits ： 9999.98→9999.99→0000.00→0000.01kWh(MWh) Integer 5

Logging period of the internal memory of the main unit as following: 1. In case of detailed data Logging period differ

Logging period of the optional SD memory card (EMU4-SD2GB) is according to the logging cycle of detail data and the numb

The function calculates the value of each measurement element of voltage, power factor by inputting only current using s

Following causes are assumed for the error. 1. Wrong orientation of the sensor? 2. 1-side and 3-side of the sensor a

Since location of the decimal point or units of the measured value displayed is decided by Total load power, it is impos

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Energy Saving Supporting Devices > Energy Saving Supporting Devices > Energy Measuring Units

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Energy Measuring Units ]

11-20 of Total 36

prev 2 / 4page next

Extension of cable of the Display Unit (Model: EMU4-D65).

It is possible to extend using an extension cable (Model: EMU2-CB-T1M, EMU2-CB-T5M, EMU2-CB-T10M). Secure the total length of the extension cable is less t... More Details >>
- No：22122
- Release Date：2018/08/27 16:41
As to action upon memory shortage of the SD memory card.

It will stop outputting logging data from the Logging Unit. [SD C.] LED will be high-speed blinking （repeat of 0.25sec ON → 0.25sec OFF）. Backup the data ... More Details >>
- No：22135
- Release Date：2018/08/27 16:41
Sample program for MODBUS RTU communication(EcoMonitorPlus/EcoMonitorLight)

Sample programs are described in Programming Manual. Please refer to MODBUS Interface specifications (LSPY-9025) and MODBUS Interface soecifications(LSPY-9... More Details >>
- No：24806
- Release Date：2019/03/27 12:12
MEASURE LED not blink (EcoMonitorPlus).

MEASURE LED lights while measuring electric power over 0.4% of the total load power. Check below points: 1. Is voltage wiring connected? 2. Are the trans... More Details >>
- No：22144
- Release Date：2018/08/27 16:41
As to indication of the measurement value of the electric energy　(EcoMonitorPlus/Light).

It measures from 0kWh(MWh) after going round. Integer 4 digits ： 9999.98→9999.99→0000.00→0000.01kWh(MWh) Integer 5 digits ： 99999.8→99999.9→00000.0→0000... More Details >>
- No：22131
- Release Date：2018/08/27 16:41
As to logging period of the internal memory of the main unit.

Logging period of the internal memory of the main unit as following: 1. In case of detailed data Logging period differs according to logging cycle for deta... More Details >>
- No：22137
- Release Date：2018/08/27 16:41
- Update：2018/09/07 12:43
As to logging period of the optional SD memory card (EMU4-SD2GB).

Logging period of the optional SD memory card (EMU4-SD2GB) is according to the logging cycle of detail data and the number of measuring circuits. * It is ... More Details >>
- No：22136
- Release Date：2018/08/27 16:41
- Update：2018/09/07 12:48
As to simple measuring function of the EcoMonitorPlus (Model: EMU4-BM1-MB、EMU4-HM1-MB、EMU4-A2、EMU4-VA2).

The function calculates the value of each measurement element of voltage, power factor by inputting only current using setting value. This function is used... More Details >>
- No：22127
- Release Date：2018/08/27 16:41
Cause of "minus" indication for electric power value (EcoMonitorPlus/Light).

Following causes are assumed for the error. 1. Wrong orientation of the sensor? 2. 1-side and 3-side of the sensor are reversed? 3. Is connection betwe... More Details >>
- No：22143
- Release Date：2018/08/27 16:41
As to changing location of the decimal point and units of the measured value.

Since location of the decimal point or units of the measured value displayed is decided by Total load power, it is impossible to change location of the decim... More Details >>
- No：22139
- Release Date：2018/08/27 16:41

11-20 of Total 36

Inquiries

page top