Connectable. Provided that it is impossible to extend a measuring circuit for insulation monitoring.

Use an extension cable (Model: EMU2-CB-T1M / EMU2-CB-T5M/EMU2-CB-T10M / EMU2-CB-T1MS / EMU2-CB-T5MS / EMU2-CB-T10MS) for

A dedicated Display Unit (Model: EMU4-D65) is used to set the EcoMonitorPlus (Model ：EMU4-BM1-MB, EMU4-HM1-MB, EMU4-LG1

It will stop outputting logging data from the Logging Unit. [SD C.] LED will be high-speed blinking （repeat of 0.25sec

As shown in the figure below, a current transformer (CT) with a secondary current of 5A is attached to the measurement l

MEASURE LED lights while measuring electric power over 0.4% of the total load power. Check below points: 1. Is voltage

No, it is impossible. But Multi-drop connection is possible. For details, refer to connection examples as below.

For 3P4W circuits, set the VT primary voltage value (between L and N). Except for 3P4W circuits, set the VT primary volt

Sample programs are described in Programming Manual. Please refer to MODBUS Interface specifications (LSPY-9025) and MOD

Using Logging Unit Utility (free software), it is able to create a daily/monthly report using logging data acquired by t

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Energy Saving Supporting Devices > Energy Saving Supporting Devices > Energy Measuring Units

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Energy Measuring Units ]

21-30 of Total 36

prev 3 / 4page next

As to connecting an Extension Unit for an Insulation Monitor Model (Model: EMU4-LG1-MB).

Connectable. Provided that it is impossible to extend a measuring circuit for insulation monitoring. More Details >>
- No：22123
- Release Date：2018/08/27 16:41
Extension of current sensor cable (EcoMonitorPlus/Light).

Use an extension cable (Model: EMU2-CB-T1M / EMU2-CB-T5M/EMU2-CB-T10M / EMU2-CB-T1MS / EMU2-CB-T5MS / EMU2-CB-T10MS) for extending the cable between EcoMonit... More Details >>
- No：22118
- Release Date：2018/08/27 16:41
- Update：2018/09/07 11:47
As to settings for EcoMonitorPlus (Model: EMU4-BM1-MB, EMU4-HM1-MB, EMU4-LG1-MB, EMU4-A2, EMU4-VA2, EMU4-AX4, EMU4-PX4).

A dedicated Display Unit (Model: EMU4-D65) is used to set the EcoMonitorPlus (Model ：EMU4-BM1-MB, EMU4-HM1-MB, EMU4-LG1-MB, EMU4-A2, EMU4-VA2, EMU4-AX4, EMU... More Details >>
- No：22128
- Release Date：2018/08/27 16:41
As to action upon memory shortage of the SD memory card.

It will stop outputting logging data from the Logging Unit. [SD C.] LED will be high-speed blinking （repeat of 0.25sec ON → 0.25sec OFF）. Backup the data ... More Details >>
- No：22135
- Release Date：2018/08/27 16:41
How to measure circuits over 600A (EcoMonitorPlus / Light)

As shown in the figure below, a current transformer (CT) with a secondary current of 5A is attached to the measurement location, and a split-type current sen... More Details >>
- No：38042
- Release Date：2021/02/25 17:54
MEASURE LED not blink (EcoMonitorPlus).

MEASURE LED lights while measuring electric power over 0.4% of the total load power. Check below points: 1. Is voltage wiring connected? 2. Are the trans... More Details >>
- No：22144
- Release Date：2018/08/27 16:41
Branch connection for MODBUS RTU communication

No, it is impossible. But Multi-drop connection is possible. For details, refer to connection examples as below. More Details >>
- No：24808
- Release Date：2019/03/27 14:44
EcoWebServerIII's rated voltage value setting with VT connections

For 3P4W circuits, set the VT primary voltage value (between L and N). Except for 3P4W circuits, set the VT primary voltage value (between L and L). <Re... More Details >>
- No：38040
- Release Date：2021/02/25 17:54
Sample program for MODBUS RTU communication(EcoMonitorPlus/EcoMonitorLight)

Sample programs are described in Programming Manual. Please refer to MODBUS Interface specifications (LSPY-9025) and MODBUS Interface soecifications(LSPY-9... More Details >>
- No：24806
- Release Date：2019/03/27 12:12
Method for creating a daily/monthly report using logging data (Model: EMU4-LM).

Using Logging Unit Utility (free software), it is able to create a daily/monthly report using logging data acquired by the Logging Unit for the Energy Measur... More Details >>
- No：22120
- Release Date：2018/08/27 16:41

21-30 of Total 36

Inquiries

page top