Since the EMU4-LM performs data logging, it is possible to log the data even in a state of removing the SD memory card.

Following causes are assumed for the error. 1. Wrong orientation of the sensor? 2. 1-side and 3-side of the sensor a

Setting different logging ID enables that one SD memory card can be used for several Logging Units. Settable logging ID

Logging period of the internal memory of the main unit as following: 1. In case of detailed data Logging period differs

Attach a current transformer (CT) whose secondary current is 5A to the measuring point, then connect a split-type 5A cur

Match the setting values with EMU4-PX4 and EcoWebServerIII. No need to consider one-cycle operation because it is automa

Using Logging Unit Utility (free software), it is able to create a daily/monthly report using logging data acquired by t

Sample programs are described in Programming Manual. Please refer to MODBUS Interface specifications (LSPY-9025) and MOD

For 3P4W circuits, set the VT primary voltage value (between L and N). Except for 3P4W circuits, set the VT primary volt

No, it is impossible. But Multi-drop connection is possible. For details, refer to connection examples as below.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Energy Saving Supporting Devices > Energy Saving Supporting Devices > Energy Measuring Units

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Energy Measuring Units ]

1-10 of Total 36

prev 1 / 4page next

As to logging after removing an SD memory card.

Since the EMU4-LM performs data logging, it is possible to log the data even in a state of removing the SD memory card. Provided that the period for data l... More Details >>
- No：22134
- Release Date：2018/08/27 16:41
Cause of "minus" indication for electric power value (EcoMonitorPlus/Light).

Following causes are assumed for the error. 1. Wrong orientation of the sensor? 2. 1-side and 3-side of the sensor are reversed? 3. Is connection betwe... More Details >>
- No：22143
- Release Date：2018/08/27 16:41
As to using SD memory card at multiple locations.

Setting different logging ID enables that one SD memory card can be used for several Logging Units. Settable logging ID is 1 to 255. More Details >>
- No：22132
- Release Date：2018/08/27 16:41
As to logging period of the internal memory of the main unit.

Logging period of the internal memory of the main unit as following: 1. In case of detailed data Logging period differs according to logging cycle for deta... More Details >>
- No：22137
- Release Date：2018/08/27 16:41
- Update：2018/09/07 12:43
Method for measuring a circuit over 600A (EcoMonitorPlus/Light).

Attach a current transformer (CT) whose secondary current is 5A to the measuring point, then connect a split-type 5A current sensor (Model: EMU-CT5-A, EMU2-C... More Details >>
- No：22119
- Release Date：2018/08/27 16:41
- Update：2018/09/07 11:38
Pulse magnification setting of EMU4-PX4(Pulse Input Unit)

Match the setting values with EMU4-PX4 and EcoWebServerIII. No need to consider one-cycle operation because it is automatically calculated in EcoWebServerII... More Details >>
- No：38041
- Release Date：2021/02/25 17:54
Method for creating a daily/monthly report using logging data (Model: EMU4-LM).

Using Logging Unit Utility (free software), it is able to create a daily/monthly report using logging data acquired by the Logging Unit for the Energy Measur... More Details >>
- No：22120
- Release Date：2018/08/27 16:41
Sample program for MODBUS RTU communication(EcoMonitorPlus/EcoMonitorLight)

Sample programs are described in Programming Manual. Please refer to MODBUS Interface specifications (LSPY-9025) and MODBUS Interface soecifications(LSPY-9... More Details >>
- No：24806
- Release Date：2019/03/27 12:12
EcoWebServerIII's rated voltage value setting with VT connections

For 3P4W circuits, set the VT primary voltage value (between L and N). Except for 3P4W circuits, set the VT primary voltage value (between L and L). <Re... More Details >>
- No：38040
- Release Date：2021/02/25 17:54
Branch connection for MODBUS RTU communication

No, it is impossible. But Multi-drop connection is possible. For details, refer to connection examples as below. More Details >>
- No：24808
- Release Date：2019/03/27 14:44

1-10 of Total 36

Inquiries

page top