Specify the display position of the key window in the screen design software as follows. ◆ GT Designer3 (GOT3000) Versio

The following shows how to set the PLC station number when connecting the GOT to the PLC via Ethernet. Configure the se

The following objects are available to switch the displayed character string by turning the bit device on or off. 1. Bit

These numbers are specified when accessing the buffer memory of the intelligent function module (bus conversion module).

When connecting the MELSEC iQ-F series (FX5U, FX5UC, FX5UJ, or FX5S) via Ethernet, set Port No. in Connected Ethernet Co

The screen number displayed on the GOT can be monitored with the PLC. Perform one of the following operations. 1. Monit

If input by touching the key window is not possible, check the display settings of the cursor. Even if the key window i

You can place an object anywhere you like in the screen design software instead of aligning it with the grid lines. ◆ Fo

The historical graph function displays the device data (logging data) collected using the logging function chronological

You cannot operate the objects of the GOT with the gesture function using the SoftGOT-GOT link function, since GT SoftGO

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Human Machine Interfaces > Human Machine Interfaces MELHMI-GOT > GT SoftGOT > SoftGOT2000

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ SoftGOT2000 ]

21-30 of Total 32

prev 3 / 4page next

Specifying the display position of the key window

Specify the display position of the key window in the screen design software as follows. ◆ GT Designer3 (GOT3000) Version 1, GT Designer3 (GOT2000) Version ... More Details >>
- No：45299
- Release Date：2025/10/22 17:13
Setting the PLC station number when connecting the GOT to the PLC via Ethernet

The following shows how to set the PLC station number when connecting the GOT to the PLC via Ethernet. Configure the settings in the screen design software.... More Details >>
- No：45293
- Release Date：2025/10/22 17:12
An object used to change the displayed character string according to the device value

The following objects are available to switch the displayed character string by turning the bit device on or off. 1. Bit comment Use this object to display... More Details >>
- No：45265
- Release Date：2025/10/22 17:09
I/O numbers and module number of the MELSEC series

These numbers are specified when accessing the buffer memory of the intelligent function module (bus conversion module). The number assignment method differ... More Details >>
- No：45253
- Release Date：2025/10/22 17:07
Port No. in Connected Ethernet Controller Setting when connecting the MELSEC iQ-F series via Ethernet

When connecting the MELSEC iQ-F series (FX5U, FX5UC, FX5UJ, or FX5S) via Ethernet, set Port No. in Connected Ethernet Controller Setting as shown in Table 2.... More Details >>
- No：45266
- Release Date：2025/10/22 17:10
Checking the screen number of the displayed screen on the GOT

The screen number displayed on the GOT can be monitored with the PLC. Perform one of the following operations. 1. Monitor the screen switching device. Set ... More Details >>
- No：45275
- Release Date：2025/10/22 17:11
Unable to input by touching the key window

If input by touching the key window is not possible, check the display settings of the cursor. Even if the key window is displayed, input is not possible if... More Details >>
- No：45271
- Release Date：2025/10/22 17:10
Placing objects

You can place an object anywhere you like in the screen design software instead of aligning it with the grid lines. ◆ For GT Designer3 (GOT2000) Version 1 ... More Details >>
- No：45249
- Release Date：2025/10/22 17:07
Historical trend graph function

The historical graph function displays the device data (logging data) collected using the logging function chronologically in a graph. This function, unlike... More Details >>
- No：45242
- Release Date：2025/10/22 17:03
Operating the objects with the gesture function using the SoftGOT-GOT link function

You cannot operate the objects of the GOT with the gesture function using the SoftGOT-GOT link function, since GT SoftGOT2000 does not support the gesture fu... More Details >>
- No：23464
- Release Date：2018/09/14 15:06

21-30 of Total 32

Inquiries

page top