That is described as below. (1) By laying ZCTs for two feeders having different loads, detected by one earth fault d

In steady state, it is 5.0 VA, and during operation, it is 6.0 VA.

It operates on a root mean square value of a fundamental wave.

That is right. Standard JIS C 4602 defines it shall be 50ms or shorter when 200% of the settling value is input.

This relay uses the input voltage at the VT secondary side (P1-P2) as the relay control power source. When a rated volta

It operates with a settled operation time.

A momentary power interruption is not detectable.

It is required that the resistance is lower than 5 ohm for a go and return length using sealed cables. Other than MPD-3

Because between memories, a value becomes unstable, reset the position to the correct position.

It is impossible. Because the type is to detect by ZCT in an ungrounded system, the sensitivity becomes very high.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Medium-voltage Power Distribution Products > Protection Relays > Protection Relays - MELPRO-A Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Protection Relays - MELPRO-A Series

COMMON(4)

FAQ within [ Protection Relays - MELPRO-A Series ]

21-30 of Total 36

prev 3 / 4page next

Combination transformer

That is described as below. (1) By laying ZCTs for two feeders having different loads, detected by one earth fault directional relay. In this case, it i... More Details >>
- No：23724
- Release Date：2018/09/19 17:16
- Update：2018/09/20 14:23
- Category： Protection Relays - MELPRO-A Series , MDG
Burden of MOC-A1 type

In steady state, it is 5.0 VA, and during operation, it is 6.0 VA. More Details >>
- No：23715
- Release Date：2018/09/19 17:16
- Category： Protection Relays - MELPRO-A Series , MOC
Detection of current

It operates on a root mean square value of a fundamental wave. More Details >>
- No：23710
- Release Date：2018/09/19 17:16
- Category： Protection Relays - MELPRO-A Series , MOC
The operating time of the instantaneous factor operating characteristics

That is right. Standard JIS C 4602 defines it shall be 50ms or shorter when 200% of the settling value is input. More Details >>
- No：23706
- Release Date：2018/09/19 17:16
- Category： Protection Relays - MELPRO-A Series , MOC
Movement of contact

This relay uses the input voltage at the VT secondary side (P1-P2) as the relay control power source. When a rated voltage is input, b contact side of the co... More Details >>
- No：23733
- Release Date：2018/09/19 17:16
- Category： Protection Relays - MELPRO-A Series , MUV
Operating time of undervoltage detection

It operates with a settled operation time. More Details >>
- No：23731
- Release Date：2018/09/19 17:16
- Category： Protection Relays - MELPRO-A Series , MUV
Detection of undervoltage

A momentary power interruption is not detectable. More Details >>
- No：23732
- Release Date：2018/09/19 17:16
- Category： Protection Relays - MELPRO-A Series , MUV
Combination transformer

It is required that the resistance is lower than 5 ohm for a go and return length using sealed cables. Other than MPD-3 type ZVT, it is similar to the distan... More Details >>
- No：23719
- Release Date：2018/09/19 17:16
- Category： Protection Relays - MELPRO-A Series , MDG
Position of switch

Because between memories, a value becomes unstable, reset the position to the correct position. More Details >>
- No：23738
- Release Date：2018/09/19 17:16
- Category： Protection Relays - MELPRO-A Series , COMMON
Scope of Application

It is impossible. Because the type is to detect by ZCT in an ungrounded system, the sensitivity becomes very high. More Details >>
- No：23727
- Release Date：2018/09/19 17:16
- Category： Protection Relays - MELPRO-A Series , MGR

21-30 of Total 36

Inquiries

page top