The screen save can be controlled from the PLC. Use the system information (read device). When the Forced Screen Saver

The following three methods are available to close the window screen. 1. Touch the [x] button on the right side of the

Possible causes of slow screen switching are as follows: • The incorrect communication driver is selected. • When connec

These numbers are specified when accessing the buffer memory of the intelligent function module (bus conversion module).

The following shows how to place the countdown timer on the screen using the timer device of the PLC. Set the numerical

If a negative value is displayed instead of 40000 when monitoring the device value on the numerical display, check the n

The method of entering a value using numerical keys placed on the same base screen without displaying the key window for

The method for connecting GT SoftGOT3000 with GX Simulator3 is as follows. * Use GX Works3 Version 1.105K or later. ◆ F

The following shows how to limit numerical display, numerical input, text display, and text input using level authentica

The following shows how to set the PLC station number when connecting the GOT to the PLC via Ethernet. Configure the se

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Human Machine Interfaces > Human Machine Interfaces MELHMI-GOT > GT SoftGOT > SoftGOT3000

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ SoftGOT3000 ]

21-30 of Total 32

prev 3 / 4page next

How to control the screen saver from the PLC

The screen save can be controlled from the PLC. Use the system information (read device). When the Forced Screen Saver Enable signal (System signal 1-1.b1)... More Details >>
- No：45248
- Release Date：2025/10/22 17:06
Closing the window screen

The following three methods are available to close the window screen. 1. Touch the [x] button on the right side of the title bar displayed on the window scr... More Details >>
- No：45245
- Release Date：2025/10/22 17:05
Reasons for slow screen switching

Possible causes of slow screen switching are as follows: • The incorrect communication driver is selected. • When connected via Ethernet, a device with a d... More Details >>
- No：45283
- Release Date：2025/10/22 17:11
I/O numbers and module number of the MELSEC series

These numbers are specified when accessing the buffer memory of the intelligent function module (bus conversion module). The number assignment method differ... More Details >>
- No：45253
- Release Date：2025/10/22 17:07
How to place a countdown timer on the screen using the timer device of the PLC

The following shows how to place the countdown timer on the screen using the timer device of the PLC. Set the numerical display with the screen design softw... More Details >>
- No：45252
- Release Date：2025/10/22 17:06
When a negative value is displayed on the numerical display instead of a positive value

If a negative value is displayed instead of 40000 when monitoring the device value on the numerical display, check the numerical display settings in the scre... More Details >>
- No：45250
- Release Date：2025/10/22 17:06
How to enter a value using numerical keys placed on the same base screen without displaying the key window for numerical input

The method of entering a value using numerical keys placed on the same base screen without displaying the key window for numerical input is as follows: Conf... More Details >>
- No：45284
- Release Date：2025/10/23 10:54
How to connect GT SoftGOT3000 with GX Simulator3

The method for connecting GT SoftGOT3000 with GX Simulator3 is as follows. * Use GX Works3 Version 1.105K or later. ◆ For GT SoftGOT3000 Version 1 1. Disp... More Details >>
- No：45285
- Release Date：2025/10/22 17:11
Limiting numerical display, numerical input, text display, and text input using level authentication (password authentication)

The following shows how to limit numerical display, numerical input, text display, and text input using level authentication. Configure the settings in the ... More Details >>
- No：45281
- Release Date：2025/10/22 17:11
Setting the PLC station number when connecting the GOT to the PLC via Ethernet

The following shows how to set the PLC station number when connecting the GOT to the PLC via Ethernet. Configure the settings in the screen design software.... More Details >>
- No：45293
- Release Date：2025/10/22 17:12

21-30 of Total 32

Inquiries

page top