When the rotary switch is “0”, the 1st axis and is “1”, the 2nd axis. When the rotary switch is “A”, the 11th axis and i

We have the English version of capacity selection software available. For details, contact your local sales office.

The following version or later is supported for Windows 8. MR Configurator2, 1.20W or later

You can solder the wiring to the connector without using the junction terminal block (option).

For the safety of use, the wiring is recommended. If not using the wiring, set the parameter No. PA04 to “0100”.

“off” is shown in th

Operation mode for manufacturer setting is enabled. For MR-J4-B, MR-J4W2-B and MR-J4W3-B, turning "ON (up)" all the cont

You can download the instruction manual from the Mitsubishi Electric FA Global Website. Visit the Mitsubishi Electric F

The system is probably malfunctioning and is in dangerous condition. Do not use it. For repair, contact your local sales

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products > AC Servos-MELSERVO

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

AC Servos-MELSERVO

FAQ within [ AC Servos-MELSERVO ]

1-10 of Total 36

prev 1 / 4page next

Relationship between rotary switch and axis number

When the rotary switch is “0”, the 1st axis and is “1”, the 2nd axis. When the rotary switch is “A”, the 11th axis and is “F”, the 16th axis. In combination ... More Details >>
- No：23644
- Release Date：2018/09/14 15:10
- Category： MELSERVO-J4
English version of capacity selection software

We have the English version of capacity selection software available. For details, contact your local sales office. More Details >>
- No：23642
- Release Date：2018/09/14 15:10
- Category： Servo Support Software
Supported OS

The following version or later is supported for Windows 8. MR Configurator2, 1.20W or later More Details >>
- No：23633
- Release Date：2018/09/14 15:10
- Category： Servo Support Software
Wiring to connector

You can solder the wiring to the connector without using the junction terminal block (option). More Details >>
- No：23654
- Release Date：2018/09/14 15:10
- Category： MELSERVO-J4
Replacement of MR-BAT6V1SET

No More Details >>
- No：23649
- Release Date：2018/09/14 15:10
- Category： MELSERVO-J4
Wiring to connector

You can solder the wiring to the connector without using the junction terminal block (option). More Details >>
- No：23653
- Release Date：2018/09/14 15:10
- Category： MELSERVO-JN
Is the forced stop signal wiring necessary?

For the safety of use, the wiring is recommended. If not using the wiring, set the parameter No. PA04 to “0100”. More Details >>
- No：23645
- Release Date：2018/09/14 15:10
- Category： MELSERVO-J4
“off” is shown in the display.

Operation mode for manufacturer setting is enabled. For MR-J4-B, MR-J4W2-B and MR-J4W3-B, turning "ON (up)" all the control axis setting switches (SW2) enabl... More Details >>
- No：23625
- Release Date：2018/09/14 15:10
- Category： MELSERVO-J4
Instruction manual of capacity selection software

You can download the instruction manual from the Mitsubishi Electric FA Global Website. Visit the Mitsubishi Electric FA Global Website and go to [Download]... More Details >>
- No：23643
- Release Date：2018/09/14 15:10
- Category： Servo Support Software
Wrong connection of servo amplifier power supply

The system is probably malfunctioning and is in dangerous condition. Do not use it. For repair, contact your local sales office. More Details >>
- No：23623
- Release Date：2018/09/14 15:10
- Category： MELSERVO-J4 , MELSERVO-JE

1-10 of Total 36

Inquiries

page top