The alarm E7 occurs when the forced stop signal of the servo system controller is enabled. Ensure the safety and cancel

From Start menu of Windows >, click [All Programs] > - [MELSOFT Application] > - [MR Configurator2] > and y

Some parameters are write-protected. (MR-J4/MR-J3: PA19)The parameter to be displayed is determined by the setting value

MR-J4-A receives the motor drive command by general pulse train and MR-J4-B does by the optical communication, SSCNET II

Using MR Configurator2, you can perform the positioning operation when there is no command from the controller. You can

The “current command” is the command value for the current control (torque control) and the “torque” is the feedback val

MR Configurator2 has been improved in the following. ・The servo assistant function introduces the related functions fo

By either of following methods: (MR-J4) 1. On MR Configurator2, select [Diagnosis] - [Alarm Display] - [Clear]. 2. Set

The servo amplifier has the motor-less operation function. Without connecting the servo motor, output signals or status

The power running is the status that the servo amplifier is supplying the power to the servo motor when the servo motor

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products > AC Servos-MELSERVO

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

AC Servos-MELSERVO

FAQ within [ AC Servos-MELSERVO ]

1-10 of Total 36

prev 1 / 4page next

Alarm E7

The alarm E7 occurs when the forced stop signal of the servo system controller is enabled. Ensure the safety and cancel the forced stop signal of the control... More Details >>
- No：23647
- Release Date：2018/09/14 15:10
- Category： MELSERVO-J4 , MELSERVO-JE
MR-J4(W)-B mode selection application

From Start menu of Windows >, click [All Programs] > - [MELSOFT Application] > - [MR Configurator2] > and you can find “MR-J4(W)-B mode selectio... More Details >>
- No：23637
- Release Date：2018/09/14 15:10
- Category： Servo Support Software , MELSERVO-J4
Parameter group is not displayed.

Some parameters are write-protected. (MR-J4/MR-J3: PA19)The parameter to be displayed is determined by the setting value of this parameter. Do as follows for... More Details >>
- No：23657
- Release Date：2018/09/14 15:10
- Category： MELSERVO-J3 , MELSERVO-J4
Differences between type A and type B

MR-J4-A receives the motor drive command by general pulse train and MR-J4-B does by the optical communication, SSCNET III/H of our motion network. For the de... More Details >>
- No：23648
- Release Date：2018/09/14 15:10
- Category： MELSERVO-J4
Positioning operation

Using MR Configurator2, you can perform the positioning operation when there is no command from the controller. You can perform the operation specifying the ... More Details >>
- No：23640
- Release Date：2018/09/14 15:10
- Category： Servo Support Software , MELSERVO-J4 , MELSERVO-JE , MELSERVO-JN , MELSERVO-J3
Difference between the current command and torque

The “current command” is the command value for the current control (torque control) and the “torque” is the feedback value controlled by the current control ... More Details >>
- No：23624
- Release Date：2018/09/14 15:10
- Category： MELSERVO-J4 , MELSERVO-JE , MELSERVO-JN , MELSERVO-J3 , MELSERVO Others
MR Configurator2

MR Configurator2 has been improved in the following. ・The servo assistant function introduces the related functions for each operation step to enable the f... More Details >>
- No：23658
- Release Date：2018/09/14 15:10
- Category： Servo Support Software
Clearing the alarm history

By either of following methods: (MR-J4) 1. On MR Configurator2, select [Diagnosis] - [Alarm Display] - [Clear]. 2. Set alarm history clear of parameter to "... More Details >>
- No：23650
- Release Date：2018/09/14 15:10
- Category： MELSERVO-J4
Motor-less operation

The servo amplifier has the motor-less operation function. Without connecting the servo motor, output signals or status display can be provided in response t... More Details >>
- No：23641
- Release Date：2018/09/14 15:10
- Category： Servo Support Software , MELSERVO-J4 , MELSERVO-JE , MELSERVO-JN , MELSERVO-J3
What are power running and regeneration?

The power running is the status that the servo amplifier is supplying the power to the servo motor when the servo motor drives the load. (Example) When the s... More Details >>
- No：23626
- Release Date：2018/09/14 15:10
- Category： MELSERVO-J4 , MELSERVO-JE , MELSERVO-JN , MELSERVO-J3 , MELSERVO Others

1-10 of Total 36

Inquiries

page top