Start main contents

Factory Automation

FAQ

Factory Automation

FAQAbout Products

  • Font Size
  • S
  • M
  • L

Keyword Search

You can search two or more words separated by a space. 
 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

FAQ within [ MELSERVO-JE ]

1-10 of Total 16

prev 1 / 2page next

  • Wrong connection of servo amplifier power supply

    The system is probably malfunctioning and is in dangerous condition. Do not use it. For repair, contact your local sales office. More Details >>

    • No：23623
    • Release Date：2018/09/14 15:10

  • SSCNET III cable type

    Thickness of coating and length of cable provided More Details >>

    • No：23651
    • Release Date：2018/09/14 15:10

  • SSCNET III cable type

    Depending on each cable. Refer to each SSCNET III/H compatible servo amplifier instruction manual. More Details >>

    • No：23652
    • Release Date：2018/09/14 15:10

  • One-touch tuning

    The one-touch tuning does not require the response level setting also. Outlines of one-touch tuning and auto tuning are as follows: One-touch tuning: You can... More Details >>

    • No：23629
    • Release Date：2018/09/14 15:10

  • Encoder resolution during J3 compatibility mode

    18 bits (262,144 pulses/rev.) The encoder resolution of HG series servo motor in J4 mode is 22 bits (4,194,304 pulses/rev). For details of J3 compatibility m... More Details >>

    • No：23630
    • Release Date：2018/09/14 15:10

  • Output check

    Using MR Configurator2, you can switch the output signals on/off forcibly independently of the servo status. This function is used for output signal wiring c... More Details >>

    • No：23639
    • Release Date：2018/09/14 15:10

  • Unit power consumption

    The module power consumption displays the power consumption of servo motor. Positive value indicates power running and negative value indicates regeneration. More Details >>

    • No：23636
    • Release Date：2018/09/14 15:10

  • Motor-less operation

    The servo amplifier has the motor-less operation function. Without connecting the servo motor, output signals or status display can be provided in response t... More Details >>

    • No：23641
    • Release Date：2018/09/14 15:10

  • Positioning operation

    Using MR Configurator2, you can perform the positioning operation when there is no command from the controller. You can perform the operation specifying the ... More Details >>

    • No：23640
    • Release Date：2018/09/14 15:10

  • What are power running and regeneration?

    The power running is the status that the servo amplifier is supplying the power to the servo motor when the servo motor drives the load. (Example) When the s... More Details >>

    • No：23626
    • Release Date：2018/09/14 15:10

1-10 of Total 16

Inquiries

Contact Us

page top