Select the total capacity of the servo amplifier to be connected. For selecting combination of FR-CV power regeneration

When the MR-J4-B is selected on the model selection screen at creating a new project, the multi-axis check box will be e

Some parameters are write-protected. (MR-J4/MR-J3: PA19)The parameter to be displayed is determined by the setting value

Yes, it is. For MR-J4-A/MR-J3-A, set by [Pr. PC13]. As the initial value (100.0%), the maximum torque is generated at ±

The servo amplifier has the motor-less operation function. Without connecting the servo motor, output signals or status

The “current command” is the command value for the current control (torque control) and the “torque” is the feedback val

Using MR Configurator2, you can perform the positioning operation when there is no command from the controller. You can

The pulse train form outputted with the controller and the setting of servo amplifier (command pulse input form) may dif

For the long wiring (50 m to 100 m) between the servo amplifier and servo motor, there are some precautions (encoder cab

The power running is the status that the servo amplifier is supplying the power to the servo motor when the servo motor

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products > AC Servos-MELSERVO > MELSERVO-J3

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ MELSERVO-J3 ]

1-10 of Total 12

prev 1 / 2page next

Total capacity of servo amplifier to be connected to power regeneration common converter

Select the total capacity of the servo amplifier to be connected. For selecting combination of FR-CV power regeneration common converter and servo amplifier ... More Details >>
- No：23627
- Release Date：2018/09/14 15:10
Specifying the axis in test operation of MR-J4W

When the MR-J4-B is selected on the model selection screen at creating a new project, the multi-axis check box will be enabled. Click the check box and selec... More Details >>
- No：23635
- Release Date：2018/09/14 15:10
Parameter group is not displayed.

Some parameters are write-protected. (MR-J4/MR-J3: PA19)The parameter to be displayed is determined by the setting value of this parameter. Do as follows for... More Details >>
- No：23657
- Release Date：2018/09/14 15:10
Changing multiplication of analog torque command

Yes, it is. For MR-J4-A/MR-J3-A, set by [Pr. PC13]. As the initial value (100.0%), the maximum torque is generated at ±8 V. To generate the maximum torque a... More Details >>
- No：23628
- Release Date：2018/09/14 15:10
Motor-less operation

The servo amplifier has the motor-less operation function. Without connecting the servo motor, output signals or status display can be provided in response t... More Details >>
- No：23641
- Release Date：2018/09/14 15:10
Difference between the current command and torque

The “current command” is the command value for the current control (torque control) and the “torque” is the feedback value controlled by the current control ... More Details >>
- No：23624
- Release Date：2018/09/14 15:10
Positioning operation

Using MR Configurator2, you can perform the positioning operation when there is no command from the controller. You can perform the operation specifying the ... More Details >>
- No：23640
- Release Date：2018/09/14 15:10
Servo motor does not rotate when the command pulse is input.

The pulse train form outputted with the controller and the setting of servo amplifier (command pulse input form) may differ. Check the parameter settings. (M... More Details >>
- No：23631
- Release Date：2018/09/14 15:10
Long distance wiring

For the long wiring (50 m to 100 m) between the servo amplifier and servo motor, there are some precautions (encoder cable, etc.) to note. The wiring is not... More Details >>
- No：23632
- Release Date：2018/09/14 15:10
What are power running and regeneration?

The power running is the status that the servo amplifier is supplying the power to the servo motor when the servo motor drives the load. (Example) When the s... More Details >>
- No：23626
- Release Date：2018/09/14 15:10

1-10 of Total 12

Inquiries

page top