Logging period of the optional SD memory card (EMU4-SD2GB) is according to the logging cycle of detail data and the numb

Basic Unit manufactured in October 2016 or before is version A, which has restrictions on usage. The connectable number

It is possible to extend using an extension cable (Model: EMU2-CB-T1M, EMU2-CB-T5M, EMU2-CB-T10M). Secure the total le

Refer to the below table as to current sensor usable for EcoMonitorPlus (Model: EMU4-BM1-MB, EMU4-HM1-MB, EMU4-A2, EMU4-

Since location of the decimal point or units of the measured value displayed is decided by Total load power, it is impos

It is possible to simultaneously collect data by MODBUS RTU communication and Optional Unit connected. Provided that M

Following causes are assumed for the error. 1. Wrong orientation of the sensor? 2. 1-side and 3-side of the sensor a

For 3P4W circuits, set the VT primary voltage value (between L and N). Except for 3P4W circuits, set the VT primary vol

Match the setting values with EMU4-PX4 and EcoWebServerIII. No need to consider one-cycle operation because it is autom

Connectable. Provided that it is impossible to extend a measuring circuit for insulation monitoring.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Energy Saving Supporting Devices

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Energy Saving Supporting Devices

Energy Saving Supporting Devices(49)

Energy Measuring Units(36)
Energy Saving Data Collecting Servers(13)

FAQ within [ Energy Saving Supporting Devices ]

21-30 of Total 47

prev 3 / 5page next

As to logging period of the optional SD memory card (EMU4-SD2GB).

Logging period of the optional SD memory card (EMU4-SD2GB) is according to the logging cycle of detail data and the number of measuring circuits. * It is ... More Details >>
- No：22136
- Release Date：2018/08/27 16:41
- Update：2018/09/07 12:48
- Category： Energy Measuring Units
[EcoMonitorPlus] Caution when you are using Basic Unit (Model: EMU4-BM1-MB, EMU4-HM1-MB, or EMU4-LG1-MB) manufactured in October 2016 or before

Basic Unit manufactured in October 2016 or before is version A, which has restrictions on usage. The connectable number of extension units is two, not three ... More Details >>
- No：38008
- Release Date：2020/11/12 13:02
- Category： Energy Measuring Units
Extension of cable of the Display Unit (Model: EMU4-D65).

It is possible to extend using an extension cable (Model: EMU2-CB-T1M, EMU2-CB-T5M, EMU2-CB-T10M). Secure the total length of the extension cable is less t... More Details >>
- No：22122
- Release Date：2018/08/27 16:41
- Category： Energy Measuring Units
As to the current sensor usable for the EcoMonitorPlus (Model: EMU4-BM1-MB, EMU4-HM1-MB, EMU4-A2, EMU4-VA2).

Refer to the below table as to current sensor usable for EcoMonitorPlus (Model: EMU4-BM1-MB, EMU4-HM1-MB, EMU4-A2, EMU4-VA2). *2. It will conform to UL st... More Details >>
- No：22130
- Release Date：2018/08/27 16:41
- Update：2018/09/07 12:54
- Category： Energy Measuring Units
As to changing location of the decimal point and units of the measured value.

Since location of the decimal point or units of the measured value displayed is decided by Total load power, it is impossible to change location of the decim... More Details >>
- No：22139
- Release Date：2018/08/27 16:41
- Category： Energy Measuring Units
Simultaneous data acquisition of MODBUS RTU communication and Optional Unit.

It is possible to simultaneously collect data by MODBUS RTU communication and Optional Unit connected. Provided that MODBUS RTU communication cannot collec... More Details >>
- No：22140
- Release Date：2018/08/27 16:41
- Category： Energy Measuring Units
Cause of "minus" indication for electric power value (EcoMonitorPlus/Light).

Following causes are assumed for the error. 1. Wrong orientation of the sensor? 2. 1-side and 3-side of the sensor are reversed? 3. Is connection betwe... More Details >>
- No：22143
- Release Date：2018/08/27 16:41
- Category： Energy Measuring Units
EcoWebServerIII's rated voltage value setting with VT connections

For 3P4W circuits, set the VT primary voltage value (between L and N). Except for 3P4W circuits, set the VT primary voltage value (between L and L). <Re... More Details >>
- No：38040
- Release Date：2021/02/25 17:54
- Category： Energy Measuring Units , Energy Saving Data Collecting Servers
Pulse magnification setting of EMU4-PX4(Pulse Input Unit)

Match the setting values with EMU4-PX4 and EcoWebServerIII. No need to consider one-cycle operation because it is automatically calculated in EcoWebServerII... More Details >>
- No：38041
- Release Date：2021/02/25 17:54
- Category： Energy Measuring Units , Energy Saving Data Collecting Servers
As to connecting an Extension Unit for an Insulation Monitor Model (Model: EMU4-LG1-MB).

Connectable. Provided that it is impossible to extend a measuring circuit for insulation monitoring. More Details >>
- No：22123
- Release Date：2018/08/27 16:41
- Category： Energy Measuring Units

21-30 of Total 47

Inquiries

page top