Use an extension cable (Model: EMU2-CB-T1M / EMU2-CB-T5M/EMU2-CB-T10M / EMU2-CB-T1MS / EMU2-CB-T5MS / EMU2-CB-T10MS) for

It is possible to simultaneously collect data by MODBUS RTU communication and Optional Unit connected. Provided that M

Connectable. Provided that it is impossible to extend a measuring circuit for insulation monitoring.

Refer to the below table as to current sensor usable for EcoMonitorPlus (Model: EMU4-BM1-MB, EMU4-HM1-MB, EMU4-A2, EMU4-

A dedicated Display Unit (Model: EMU4-D65) is used to set the EcoMonitorPlus (Model ：EMU4-BM1-MB, EMU4-HM1-MB, EMU4-LG1

It will stop outputting logging data from the Logging Unit. [SD C.] LED will be high-speed blinking （repeat of 0.25sec

As shown in the figure below, a current transformer (CT) with a secondary current of 5A is attached to the measurement l

No, it is impossible. But Multi-drop connection is possible. For details, refer to connection examples as below.

MEASURE LED lights while measuring electric power over 0.4% of the total load power. Check below points: 1. Is voltage

Sample programs are described in Programming Manual. Please refer to MODBUS Interface specifications (LSPY-9025) and MOD

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Energy Saving Supporting Devices

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Energy Saving Supporting Devices

Energy Saving Supporting Devices(49)

Energy Measuring Units(36)
Energy Saving Data Collecting Servers(13)

FAQ within [ Energy Saving Supporting Devices ]

21-30 of Total 47

prev 3 / 5page next

Extension of current sensor cable (EcoMonitorPlus/Light).

Use an extension cable (Model: EMU2-CB-T1M / EMU2-CB-T5M/EMU2-CB-T10M / EMU2-CB-T1MS / EMU2-CB-T5MS / EMU2-CB-T10MS) for extending the cable between EcoMonit... More Details >>
- No：22118
- Release Date：2018/08/27 16:41
- Update：2018/09/07 11:47
- Category： Energy Measuring Units
Simultaneous data acquisition of MODBUS RTU communication and Optional Unit.

It is possible to simultaneously collect data by MODBUS RTU communication and Optional Unit connected. Provided that MODBUS RTU communication cannot collec... More Details >>
- No：22140
- Release Date：2018/08/27 16:41
- Category： Energy Measuring Units
As to connecting an Extension Unit for an Insulation Monitor Model (Model: EMU4-LG1-MB).

Connectable. Provided that it is impossible to extend a measuring circuit for insulation monitoring. More Details >>
- No：22123
- Release Date：2018/08/27 16:41
- Category： Energy Measuring Units
As to the current sensor usable for the EcoMonitorPlus (Model: EMU4-BM1-MB, EMU4-HM1-MB, EMU4-A2, EMU4-VA2).

Refer to the below table as to current sensor usable for EcoMonitorPlus (Model: EMU4-BM1-MB, EMU4-HM1-MB, EMU4-A2, EMU4-VA2). *2. It will conform to UL st... More Details >>
- No：22130
- Release Date：2018/08/27 16:41
- Update：2018/09/07 12:54
- Category： Energy Measuring Units
As to settings for EcoMonitorPlus (Model: EMU4-BM1-MB, EMU4-HM1-MB, EMU4-LG1-MB, EMU4-A2, EMU4-VA2, EMU4-AX4, EMU4-PX4).

A dedicated Display Unit (Model: EMU4-D65) is used to set the EcoMonitorPlus (Model ：EMU4-BM1-MB, EMU4-HM1-MB, EMU4-LG1-MB, EMU4-A2, EMU4-VA2, EMU4-AX4, EMU... More Details >>
- No：22128
- Release Date：2018/08/27 16:41
- Category： Energy Measuring Units
As to action upon memory shortage of the SD memory card.

It will stop outputting logging data from the Logging Unit. [SD C.] LED will be high-speed blinking （repeat of 0.25sec ON → 0.25sec OFF）. Backup the data ... More Details >>
- No：22135
- Release Date：2018/08/27 16:41
- Category： Energy Measuring Units
How to measure circuits over 600A (EcoMonitorPlus / Light)

As shown in the figure below, a current transformer (CT) with a secondary current of 5A is attached to the measurement location, and a split-type current sen... More Details >>
- No：38042
- Release Date：2021/02/25 17:54
- Category： Energy Measuring Units
Branch connection for MODBUS RTU communication

No, it is impossible. But Multi-drop connection is possible. For details, refer to connection examples as below. More Details >>
- No：24808
- Release Date：2019/03/27 14:44
- Category： Electrical Indicators , Energy Measuring Units
MEASURE LED not blink (EcoMonitorPlus).

MEASURE LED lights while measuring electric power over 0.4% of the total load power. Check below points: 1. Is voltage wiring connected? 2. Are the trans... More Details >>
- No：22144
- Release Date：2018/08/27 16:41
- Category： Energy Measuring Units
Sample program for MODBUS RTU communication(EcoMonitorPlus/EcoMonitorLight)

Sample programs are described in Programming Manual. Please refer to MODBUS Interface specifications (LSPY-9025) and MODBUS Interface soecifications(LSPY-9... More Details >>
- No：24806
- Release Date：2019/03/27 12:12
- Category： Energy Measuring Units

21-30 of Total 47

Inquiries

page top