No, it is impossible. But Multi-drop connection is possible. For details, refer to connection examples as below.

It is assumed that setting of "Master/Slave setting switch" at the bottom of the Display Unit (Model: EMU4-D65) for the

Attach a current transformer (CT) whose secondary current is 5A to the measuring point, then connect a split-type 5A cur

Match the setting values with EMU4-PX4 and EcoWebServerIII. No need to consider one-cycle operation because it is autom

Display Unit (Model: EMU4-D65) manufactured in October 2016 or before is version A, S/W version: 1.05, which does not su

Refer to the below table as to current sensor usable for EcoMonitorPlus (Model: EMU4-BM1-MB, EMU4-HM1-MB, EMU4-A2, EMU4-

Where power is not connected to a power frequency input terminal (V1, V2 terminal of demand control unit) of the EcoWebS

For 3P4W circuits, set the VT primary voltage value (between L and N). Except for 3P4W circuits, set the VT primary vol

The timing for ejecting an SD memory card is specified as below table according to the state of the [SD C.] LED of the L

Using Logging Unit Utility (free software), it is able to create a daily/monthly report using logging data acquired by t

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Energy Saving Supporting Devices

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Energy Saving Supporting Devices

Energy Saving Supporting Devices(49)

Energy Measuring Units(36)
Energy Saving Data Collecting Servers(13)

FAQ within [ Energy Saving Supporting Devices ]

1-10 of Total 47

prev 1 / 5page next

Branch connection for MODBUS RTU communication

No, it is impossible. But Multi-drop connection is possible. For details, refer to connection examples as below. More Details >>
- No：24808
- Release Date：2019/03/27 14:44
- Category： Electrical Indicators , Energy Measuring Units
Setting of "Master / slave setting switch" (Model: EMU4-D65).

It is assumed that setting of "Master/Slave setting switch" at the bottom of the Display Unit (Model: EMU4-D65) for the Energy Measuring Unit is wrong. Perfo... More Details >>
- No：22126
- Release Date：2018/08/27 16:41
- Category： Energy Measuring Units
Method for measuring a circuit over 600A (EcoMonitorPlus/Light).

Attach a current transformer (CT) whose secondary current is 5A to the measuring point, then connect a split-type 5A current sensor (Model: EMU-CT5-A, EMU2-C... More Details >>
- No：22119
- Release Date：2018/08/27 16:41
- Update：2018/09/07 11:38
- Category： Energy Measuring Units
Pulse magnification setting of EMU4-PX4(Pulse Input Unit)

Match the setting values with EMU4-PX4 and EcoWebServerIII. No need to consider one-cycle operation because it is automatically calculated in EcoWebServerII... More Details >>
- No：38041
- Release Date：2021/02/25 17:54
- Category： Energy Measuring Units , Energy Saving Data Collecting Servers
[EcoMonitorPlus] Caution when you are using Display Unit (Model: EMU4-D65) manufactured in October 2016 or before

Display Unit (Model: EMU4-D65) manufactured in October 2016 or before is version A, S/W version: 1.05, which does not support either Pulse Input Unit (Model:... More Details >>
- No：38009
- Release Date：2020/11/12 13:03
- Category： Energy Measuring Units
As to the current sensor usable for the EcoMonitorPlus (Model: EMU4-BM1-MB, EMU4-HM1-MB, EMU4-A2, EMU4-VA2).

Refer to the below table as to current sensor usable for EcoMonitorPlus (Model: EMU4-BM1-MB, EMU4-HM1-MB, EMU4-A2, EMU4-VA2). *2. It will conform to UL st... More Details >>
- No：22130
- Release Date：2018/08/27 16:41
- Update：2018/09/07 12:54
- Category： Energy Measuring Units
[E0] display of the 7-segment LEDs of the EcoWebServerIII with demand control function.

Where power is not connected to a power frequency input terminal (V1, V2 terminal of demand control unit) of the EcoWebServerIII with demand control function... More Details >>
- No：22109
- Release Date：2018/08/27 16:41
- Category： Energy Saving Data Collecting Servers
EcoWebServerIII's rated voltage value setting with VT connections

For 3P4W circuits, set the VT primary voltage value (between L and N). Except for 3P4W circuits, set the VT primary voltage value (between L and L). <Re... More Details >>
- No：38040
- Release Date：2021/02/25 17:54
- Category： Energy Measuring Units , Energy Saving Data Collecting Servers
As to ejecting an SD memory card.

The timing for ejecting an SD memory card is specified as below table according to the state of the [SD C.] LED of the Logging Unit for the Energy Measuring ... More Details >>
- No：22121
- Release Date：2018/08/27 16:41
- Update：2018/09/07 13:04
- Category： Energy Measuring Units
Method for creating a daily/monthly report using logging data (Model: EMU4-LM).

Using Logging Unit Utility (free software), it is able to create a daily/monthly report using logging data acquired by the Logging Unit for the Energy Measur... More Details >>
- No：22120
- Release Date：2018/08/27 16:41
- Category： Energy Measuring Units

1-10 of Total 47

Inquiries

page top